Old PC OC problem (unleashing mode failed)

[Qrek]

I have problem with OC with my scrap. I'm trying to OC CPU and RAM, after most of setups i have unleashing mode failed.
MB ASUS M4A78T-E
CPU AMD Phenom II x4 810
RAM OCZ Reaper PC3 12800 (OCZ3RPR16002GK)
PSU EVGA 500W 80 PLUS

 

[EarthDog]

Unleashing mode? Do you mean unganged??

Have a look at the amd overclocking guide in my sig for details on how to overclock.

 

[Qrek]

Not unganged... unleash mode.
I was doing everything with that instruction http://www.neoseeker.com/Articles/Hardware/Reviews/phenom_ii_x4_810/15.html , but i have problem with finding HT link multiplier in my BIOS

 

[Mr.Scott]

Unleash mode = ACC = core unlocker

There is no guaranty on core unlocking. If it fails, the shut off core /cores are no good.

HT link multi here. Right from your manual.

 

[Qrek]

Instruction is simple:
"To get the Phenom II X4 810 running at 3.51GHz, I had to:

set Vcore to 1.55V
set HT Northbridge to 1890MHz
set HT link multiplier to 7
set HT base clock to 270MHz
disable C1E"

You showed me HT base clock but I can't HT link multiplier.
I checked few configurations and I can set cpu for 3.51GHz but I can't set RAM for 1860 MHz because I receive that error.
I'm thinking about my PSU. Is it enough power for OC?

 

[EarthDog]

Its not the psu.

 

[Mr.Scott]

That IS your link multi.
Try actually reading your manual.

 

[Qrek]

bios after update is much different than in manual

 

[Mr.Scott]

It looks exactly the same to me.

 

[Qrek]

On top i have 5 options in manual are only 3