system dosent boot with 2 rams.

[kr7777]

AMD OVERCLOCKING CONFIGURATION.

cpb control ENABLED.
core enhancer DISABLED.
cpu downcoring DISABLED.
cool & quite ENABLED.
cpu/HT reference clock (Mhz) 200.
processor frequency multiplier AUTO.
cpu-nb fid AUTO.

NODEOCI-X2 HT LINK.

link speed AUTO.
link width AUTO.
pcie reference clock (Mhz) 100.
sb refrence clock (Mhz) 100.
spread spectrum DISABLED.

OVER VOLTAGE CONFIGURATION.

processor voltage AUTO.
cpu vcore 7-shift AUTO.
cpu-nb voltage 7-shift AUTO.
set memory voltage 1.61v.
nb-core voltage setting 1.35v.
nb-pcie voltage setting 1.15v.

Memory configuration Press enter..
DRAM command Rate 2T.
memory clock mode AUTO.

these are the settings in my bios (jetway ha12),i want to oc my cpu with my current setup.

 

[RGone]

cpu/HT reference clock (Mhz) 200.<< change to 205 and whatever the cpu multiplier is times 205 will be your new cpu speed.

Without further information like ram and cpu and cpu cooler and fans in case...not much more can say.
RGone...

 

[kr7777]

ram : Zion 1333Mhz 4x2gb ddr3(Manufacturer one kit is micron technology & other is hyundai electronics)
cpu : phenom x6 1100t
cpu cooler : CM hyper 212 evo.(1 fan)
1 in take fan and a exaust fan (coolermaster silent fan SI2)
psu : seasonic 520 Watts bronze.

 

[trents]

these are the settings in my bios (jetway ha12),i want to oc my cpu with my current setup.

Wait a minute! I thought we pretty well established the probability that the motherboard you are currently using is malfunctioning and you were asking recommendations for a new motherboard. Why are we now back to where we started when you began the thread? How can you expect to overclock a defective motherboard?

 

[dick66482209]

AMD OVERCLOCKING CONFIGURATION.

cpb control ENABLED.
core enhancer DISABLED.
cpu downcoring DISABLED.
cool & quite ENABLED.
cpu/HT reference clock (Mhz) 200.
processor frequency multiplier AUTO.
cpu-nb fid AUTO.

NODEOCI-X2 HT LINK.

link speed AUTO.
link width AUTO.
pcie reference clock (Mhz) 100.
sb refrence clock (Mhz) 100.
spread spectrum DISABLED.

OVER VOLTAGE CONFIGURATION.

processor voltage AUTO.
cpu vcore 7-shift AUTO.
cpu-nb voltage 7-shift AUTO.
set memory voltage 1.61v.
nb-core voltage setting 1.35v.
nb-pcie voltage setting 1.15v.

Memory configuration Press enter..
DRAM command Rate 2T.
memory clock mode AUTO.

these are the settings in my bios (jetway ha12),i want to oc my cpu with my current setup.

Reset BIOS or let RAM run on stock and give it 1.7V and install the two RAM (also make sure to insert it into correct slot insert it into another slot and it can only run in single channel)

 

[kr7777]

sorry for late reply .
it was a motherboard battery issue , changed it and no issue so far.

 

[trents]

sorry for late reply .
it was a motherboard battery issue , changed it and no issue so far.

So you're saying the bios wasn't remembering the settings you put in and that was causing the memory to malfunction? As far as I know the battery's only function is to cause changes to the CMOS/BIOS to be retained.

 

[kr7777]

may be . it has been 15 day since i changed the battery,no malfunction.

 

[kr7777]

can i oc my system now

 

[RGone]

Hey man, your parts and pieces, you can overclock anytime you wish. Luck.
RGone...

 

[trents]

Why not?

 

[kr7777]

how long should i test for stability

 

[RGone]

how long should i test for stability

2 hours when you reach the point that you intend to use day in and day out.
RGone...

 

[kr7777]

after 4hrs bluescreen error.
problem event name: bluescreen.
os version: 6.1.7601.2.1.0.256.1
local id: 1033.
additional information.
bccode: fe
bcp1: 0000000000000008
bcp2: 0000000000000006
bcp3: 0000000000000006
bcp4: FFFFFA80084ACB20
os version: 6_1_7601
servicepack: 1_0
product: 256_1

STOP CODE: 0X000000FE

 

[ATMINSIDE]

FE is more vCore.

 

[kr7777]

AMD OVERCLOCKING CONFIGURATION.

cpb control DISABLED .
core enhancer DISABLED.
cpu downcoring DISABLED.
cool & quite DISABLED.
cpu/HT reference clock (Mhz) 226.
processor frequency multiplier X17.
cpu-nb fid AUTO.


NODEOCI-X2 HT LINK.

link speed 1.8Ghz.
link width AUTO.
pcie reference clock (Mhz) 100.
sb refrence clock (Mhz) 100.
spread spectrum DISABLED.

OVER VOLTAGE CONFIGURATION.

processor voltage: 1.425v.
cpu vcore 7-shift: +50mv.
cpu-nb voltage 7-shift AUTO.
set memory voltage 1.69v.
nb-core voltage setting 1.35v.
nb-pcie voltage setting 1.15v.

Memory configuration Press enter..
DRAM command Rate 2T.
memory clock mode: 1066.

are these settings ok ,can i increase more vcore will it be safe because when my vcore is set to 1.425v+50mv cpuz shows 1.56v while stress test.

idel

full load

just in case

 

[ATMINSIDE]

Some 1100T processors have trouble past the 3800MHz range, so keep that in mind.

Also, your motherboard doesn't have the best VRM setup out there, so it might not be able to push enough power to the CPU, causing the BSODs at higher frequencies.

 

[TeknoBug]

Probably a dead DRAM socket, that happened to one of my AM2 boards before, did you try other slots?