What is the maximum voltage you use to run your E8500/E8400/E3110/E7200 for 24/7 use?

[Brolloks]

Thidy you are one of the most "attention to detail" people I know

 

[retrogreq]

Processor:E8500 E0
Speed:4151
Voltage:1.336v
Temperature:51c
Load program: occt/prime
Cooling:Sunbeam core contact freezer

 

[doz]

Might as well toss my settings in there as Ive been running it for over 2 months.

Processor: E8400 C0
Speed: 4300
Voltage: 1.538v (load, in CPUz)
Temperature: 68c
Load program: Orthos/Prime small FFT
Cooling: Water, Fuzion V1, MCR-220, D5

 

[Overbrazil]

Might as well toss my settings in there as Ive been running it for over 2 months.

Processor: E8400 C0
Speed: 4300
Voltage: 1.538v (load, in CPUz)
Temperature: 68c
Load program: Orthos/Prime small FFT
Cooling: Water, Fuzion V1, MCR-220, D5

doz this is a lot of voltage for a normal use.

 

[doz]

Sure is.. Trying to prove that voltage doesnt shorten the lifespan as much as people think. Maybe well get some better (not necessarily more efficient though) overclocks from people instead of everyone capping at 1.45v

 

[freeagent]

Processor: E8600 E0 ES
Speed: 4410mhz
Voltage: 1.425v
Temperature: 57c
Load program: prime 25.8
Cooling: Ultra120ext. with 1 slow and quiet 120mm, maybe 35-40cfm?
its a nice change from the 2x 38x120 panaflo NMB-MAT @ 100 or 115cfm i believe they were, plus another directly behind them for exhaust

 

[moocow]

Processor: E8400 C0
Speed: 4410mhz
Voltage: 1.36 (bios)
Temperature: 56*C
Load program: prime 95
Cooling: TRUE w/ Coolink 1202

 

[grishenko45]

Processor: E8500 C0
Speed: 4Ghz
Voltage: 1.39v
Temperature: idle - 38 - load - 58
Load program: prime 95
Cooling: asus square evo

 

[Boulard83]

Processor: Q9550 EO
Speed: 3.825Ghz
Voltage: 1.208v cpuz
Temperature: idle - 28 - load - 45
Load program: prime 95
Cooling: Swiftech Apogee GT

On HOT summer day its : 33-51

 

[freeagent]

i think under 1.5 is fine for 24/7 use

 

[qq]

E8500 E0 1.312v 4208mhz, 31/38c idle, 60/58c load (orthos small fft) case fans @ 60% speed (silent) through BIOS and 55/54c case fans @ 100% speed (slightly noisy)...

I modified my antec 300 stock case fans with 2 pin connector and a old zalman vf700 fan mount into my current GTS250. All these fans are connected to P5K-E motherboard so I don't need to get a manual fan controller. They run at 100% when system board temperature goes above 43C

Tested with room temperature at 77F during summer with AC on.

 

[summoning]

is there anyone who degraded his chip?

 

[Atlehunekonge]

Here we go:


Processor: E8400 C0
Speed:3,81
Voltage:1,32
Temperature: Idle 30 - load 52
Load programrime95
Cooling:Kandalf LCS

 

[dyckah]

Processor:e8400 E0
Speed:4590Mhz
Voltage:1.44
Temperature:58C
Load programrime 95
Cooling:Swiftech Apogee GT

 

[Zig Ziglar]

Processor: e8500
Speed: 4100
Voltage: 1.39
Temperature: 54
Load program: Orthos
Cooling: Arctic freezer pro 7?

 

[Sydney]

Processor: E8500 C1
Speed: 4.0GHz
Voltage: 1.4V
Temperature: 60°C
Load program: Folding @ Home
Cooling: TRUE120