- Joined
- Mar 3, 2005
- Location
- Tampa, Florida
I just built my first WC System and incorperated 2 Angel Eye Ram blocks on my 2nd WC Loop, Be for warned, these blocks have very weak barbs, no threads just a small amount of glue to hold the barbs in place. I replaced the aluminum heat sink with Copper of the same size on both sides of the ram and took out the Aluminum Water turbulance "thingy?" I had to install new barbs with more surface area to grip the holes and used aqua marine expoxy and silicone. The problem I had was the original barbs leaked due to the stress of the tubing curvature (thanks Fluid XP !), so be for warned about these blocks. I have two on 2GB of PDP Patroit XBL DDR2 700Mhz (4-3-3-12, are these temps any goods or was it a waste of time ?
Ambient 31.3C
Ram Temp 26.5C
Ambient 31.3C
Ram Temp 26.5C