Getting an SLK-900A soon, need a fan recommendation.

[Chucky Da Pwner]

I was thinking either this: http://heatsinkfactory.com/cgi-bin/HFAstore.pl?user_action=detail&catalogno=CF-022

or this: http://heatsinkfactory.com/cgi-bin/HFAstore.pl?user_action=detail&catalogno=CF-010

Any other suggestions?

BTW, how many degrees do u think my idle and load temps will drop with those fans? Currently i get 41c on idle and 48c on load after 45 minutes of Prime 95.

 

[Cerberus2k7]

The Panaflo in my opinion. Then connect it to a Vantec Nexus fan controller.

 

[DoubleJ8]

I vote for the enermax. I have one on my slk900A and I never regret putting it on there.

If you do get the first one though, get it here for half of what you saw it for.

SVC

 

[glock19owner]

I like my 92mm tornado with the 7v switch mod...keeps it quite and somewhat cool with the switch on...full 119 cfm when the switch is off...

barton 2500 running at 2.03v's...slk900a w/92 mm tornado...

Full load: 38c to 40c (running toast for 2+ hours)
Idle: 32c to 34c

 

[Susquehannock]

I also have the Enermax 92mm fan on my SLK-900a.
The 80mm one actually resulted in slightly lower temps
but the 92mm is more quiet.

If you can make some sort of spacer you may be able to eliminate
the larger "dead spot" from the 92mm fan's larger hub.

Best of luck.