How many fans do you have in your case?

[Mike K]

How does cleaning up the wiring drop temps? Maybe I should consider doing that...

just like crystalmeth said. i also have rounded cables and are mostly out of the way. Also I took my computer apart to mod the chassis. When I did that I dusted everything out with an air compressor.

 

[NuebieN]

I have 2. One 110 mm in the case and one on the back of the fridge.

 

[RED Hot Machine]

In:

x2 120mm YSTECHS 120 CFM Each
x2 40mm CFM ???

Out:

x1 120mm YSTECH 120mm CFM
x1 80mm PSU fan CFM ???

Inside

x1 40mm and x1 60mm on Vid Card
Glaciator II (60mm)
Chipset cooler

Fan Bus to help with sound

 

[Milkman]

number of fans

1-80mm on hs
2-80 blowing out top rear
1-80 in the side of case
1-northbridge
1- on video card
1-60mm(blowing on hd's)
1-80mm in front

1800+ @1715 (burning in!!)
Swiftech mcx462
Abit Kr7a raid
256 mb crucial pc2100
Radeon 8500 Retail

 

[elysium]

only my power suply....



Thought I would show us poor kids here in this thread.

Ely

 

[Tbone1]

1 80mm intake (front)
1 80mm exhaust (back)
1 60mm delta on cpu

Stayin cool at 35c and nothin more than 40c at full load.
Not oc'ed (yet!!)

 

[Despotes]

1 120mm in front case blowing in
1 80 mm in front blowing in
1 120mm side panel blowing in(summer-use)
1 92mm on top sucking out
1 92mm in back sucking out
2 1X80mm & 1X92mm EnermaxPS fans
1 60mmCoolJag sucking on videocard
1 60mm on Northbridge
1 92mm on CPU
All I hear is rushing air. Not too bad

 

[maxima88]

3 80mm sunon (1 intake, 1 exhaust & 1 blowing directly on hsf)
1 120mm sunon on side cover below the 1 80mm
2 60mm evercool on top blowhole
1 delta 38 on hsf
I feel like a rookie compared to the other posts.

 

[Yodums]

1x YSTech 120mm, 131cfm Intake
1x YSTech 120mm, 131cfm Exhaust
1x Antec 92mm, Unknown CFM Blowing On The PCI Cards
1x Mini Table Fan Above The Heatsink Fan For A Cool Duct
1x Bigass Table fan behind that fan to great more turbulance and lure in more air
1x Sunon High Speed Replaced PSU Fan - Exhaust
1x Chipset Cooler Fan (Think its either 40mm or 50mm)
1x Everflow 38 On The Heatsink!
-----------------------------------------

Total = 8 Fans

Edit: Forgot my CPU Fan, Stupid Me!

Yodums

 

[Mike K]

I also just added another 80mm blowhole on top for a total of 6 fans

 

[Don Quixote]

1 80 mm psu fan
1 80mm intake fan
1 120mm intake fan
2 80mm exhaust fans
40mm on northbridge
40mm on GeForce 2
80mm Delta on MCX 462

 

[sgt. york]

1- 92 mm bottom front - intake
1 - 92 mm blowhole top - exhaust
2 - 92 mm side hole - intake
1 - 92 back - exhaust
enermax w/2 fans
volcano 7
crystal orb on ati 8500
blue org on north bridge
2 - hd fans attached with multifunctional media panel
1 - 50mm cooler master attached to back of 850

 

[Diu]

3x 80mm Fan
1x Video Card cooler
1x PSU fan
1x 120mm Fan
1x DigiDoc Fan

Total= 7Fans..

 

[DmdStar]

Under Construction...

1 80mm on CPU
2 80mm front intake
1 80mm side intake
2 80mm back exhaust
2 60mm - Vantec 5-1/4" Bay Freezer (exhaust)
2 80mm on 500W Power Supply

That aughta do it...



----------------------
OCSystem TurboCase
Epox 8K3A+ KT333
Athlon XP 1900+
Modded OCZ Goliath Heatsink w/ 80mm 5000rpm fan
256MB OCZ PC3000 SDRAM
GeForce3 Ti200
SoundBlaster Live! Platinum
60GB Maxtor ATA133 7200rpm Hard Drive
56x CD-ROM
4x4x24 CD-RW
8GB Travan Tape Drive
Bay Freezer w/ 2 60mm front exhaust fans

 

[Starfoxer]

okay, now i got more

1 super fan
2 psu fans
1 cpu fan
1 gpu fan
1 vid card fan
1 intake
1 TT ram fan
1 exhaust
2 hdd fans

11 total

a big jump from 5

 

[gone_fishin]

Intake:

1 - 80mm front bottom generic brand
2 - 80mm side blowholes gpu/cpu generic brand
4 - 30mm? 2each on 2 "Ultimate Hard drive Coolers"
1 - 30mm? digidoc5 (disconnected - makes noise)

Exhaust:

2 - 80mm enermax PSU
2 - 80mm top rear of case side by side generic brand

directional in case:

1 - blorb gpu
1 - 80mm 5000rpm thermaltake cpu
1 - 60mm sunon chipset

Total of 15 fans in full tower case

Want to upgrade the PSU fans to Thermaltake 5000 rpm to draw off the cpu exhaust better.

 

[chrismacan]

1 92mm intake on PSU
1 80mm exhaust on PSU
1 Delta 80mm on Alpha 8045
2 120mm intakes on outside of case (one cools RAID HDD's)
2 92mm exhaust near Alpha
1 slot cooler pulling of Radeon 8500
1 40mm on chipset
1 40mm on Radeon 8500

Planning on adding a couple of 40mm's to cool my DDR and maybe a couple above my PSU to get rid of the heat trap.

The 120mm are .67amp 12volts and sould like a turbine engine on a jet.

I need a bigger case so I can have more fans, then I can throw out my vacuum cleaner. LOL

 

[NASsoccer]

hmm.

92 blowhole on top -exhaust
80 on back -exhaust
80 on back -exhaust
92 on side -in
92 on side -in
80 on front -in
80 on front -in
1 on dd5
2 on first hdd cooler
1 on other cooler
2 in the enermax
1 on HSF
1 on ram
2 on video card
1 on northbridge
------------------------------
18
i didn't even realize i had that many- good thing most of them are temp controlled panaflos i guess. But, actually my case is very quiet, with 18 fans i don't see how though.

 

[Bantre]

Hmm way to many is my answer.
PSU 2 (80/92mm)
60mm high speed exhaust(delta 37 cfm)( wont mount a 80 not enough room)
60 on cpu( delta)
3 80mm enermax intakes( one front 2 sides)
Northbrige fan
Thermaltake 40mm fan Ram
Video fan
Triple 6cfm Hard driver cooler fans
Slot card exhaust.

Thats:
3x 20mm fans
3 x 40mm fans
2x 60mm fans
4x 80mm fans
1x92 mm fan
and a slot exahust fan( they seem to be near 80mm)
14 fans.
Would give temps but my thunderbird has 3 chips on the core and is running around 60's/70's C atm( but its not crashing!)
I just got my Asus a7v266-e and 1800+ cpu in the mail will give temps after I install it this weekend!

 

[Trap]

6x80 mm Sunon