- Joined
- May 30, 2007
But I'm fine with where I am at. I would like to know if there is anything I can do to lower my vCore and maintain speed. My rig is below:
Model: e6600 Retail
CPU frequency: 3.50 GHz (389x9)
Core voltage: 1.55 V
Cooling used: Scythe Ninja Plus
Load/Idle temperature: 58C/36C (room door was shut while sandra was running though once opened load temps dropped to 53-55C)
Motherboard: eVGA nVidia 680i T1 SLI
Memory: 2GB GSkill PC6400
Timings: 5-5-5-15 @ 800mhz w/ 2.0v
Case: Antec P180B w/ (5) 120mm fans
Would like to be able to lower my vCore a little to get it to run a little cooler. Sandra won't complete right now with anything under 1.55 and windows won't boot if my RAM is below 2.0
Any suggestions would be greatly appreciated.
Model: e6600 Retail
CPU frequency: 3.50 GHz (389x9)
Core voltage: 1.55 V
Cooling used: Scythe Ninja Plus
Load/Idle temperature: 58C/36C (room door was shut while sandra was running though once opened load temps dropped to 53-55C)
Motherboard: eVGA nVidia 680i T1 SLI
Memory: 2GB GSkill PC6400
Timings: 5-5-5-15 @ 800mhz w/ 2.0v
Case: Antec P180B w/ (5) 120mm fans
Would like to be able to lower my vCore a little to get it to run a little cooler. Sandra won't complete right now with anything under 1.55 and windows won't boot if my RAM is below 2.0
Any suggestions would be greatly appreciated.