• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Just overclocked my new board

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

XRogerX

Member
Joined
Jan 14, 2006
well here is my new board and memory plz let me know what you all this your opinion matter to me ty all

also this is an Abit AX78

Field Value
CPU Properties
CPU Type DualCore AMD Athlon 64 X2
CPU Alias Brisbane
CPU Stepping BH-G1
Engineering Sample No
CPUID CPU Name AMD Athlon(tm) 64 X2 Dual Core Processor 5000+
CPUID Revision 00060FB1h

CPU Speed
CPU Clock 3000.2 MHz (original: 2600 MHz, overclock: 15%)
CPU Multiplier 12.0x
CPU FSB 250.0 MHz (original: 200 MHz, overclock: 25%)
HyperTransport Clock 1250.1 MHz
Memory Bus 500.0 MHz
DRAM:FSB Ratio CPU/6

CPU Cache
L1 Code Cache 64 KB per core (Parity)
L1 Data Cache 64 KB per core (ECC)
L2 Cache 512 KB per core (On-Die, ECC, Full-Speed)

Motherboard Properties
Motherboard ID 01/17/2008-AMD770-SB600-6A66AA1AC-12
Motherboard Name Unknown

Chipset Properties
Motherboard Chipset AMD RX790, AMD Hammer
Memory Timings 6-6-6-18 (CL-RCD-RP-RAS)
Command Rate (CR) 2T

SPD Memory Modules
DIMM1: OCZ XTC SLI OCZ2N800SR2G 2 GB DDR2-800 DDR2 SDRAM (6-6-6-18 @ 400 MHz) (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz)
DIMM2: OCZ XTC SLI OCZ2N800SR2G 2 GB DDR2-800 DDR2 SDRAM (6-6-6-18 @ 400 MHz) (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz)

BIOS Properties
System BIOS Date 01/17/08
Video BIOS Date 02/29/08
Award BIOS Type Phoenix - AwardBIOS v6.00PG
Award BIOS Message
DMI BIOS Version 6.00 PG

Graphics Processor Properties
Video Adapter nVIDIA GeForce 8800 GT
GPU Code Name G92GT (PCI Express 1.0 x16 10DE / 0611, Rev A2)
GPU Clock (Geometric Domain) 602 MHz (original: 600 MHz)
GPU Clock (Shader Domain) 1512 MHz (original: 1512 MHz)
Memory Clock 900 MHz (original: 900 MHz)
 
Same board

Im running the same board as you..the abit ax78 has been a stellar board for me also even with the sb600..im o/clocked with stk voltage @
14x222=3108mhz...temps run 36-38c idle to 45-49c loaded...the cpu is a 5000BE...I have gskill ddr800 at 4,4,4,13 and all is stable....
I couldnt be happier with this setup...waiting for the 45nm denabs to see pricing and compatability with this mobo.....
 
Im running the same board as you..the abit ax78 has been a stellar board for me also even with the sb600..im o/clocked with stk voltage @
14x222=3108mhz...temps run 36-38c idle to 45-49c loaded...the cpu is a 5000BE...I have gskill ddr800 at 4,4,4,13 and all is stable....
I couldnt be happier with this setup...waiting for the 45nm denabs to see pricing and compatability with this mobo.....

I dont have the BE i have the standard 5000+ and my Idle temps are you loaded temps hmmm what is up what this ,wonder where i went wrong
 
Temps for abit ax78

I use a freezer 64 cooler and my case is a wind tunnel...mid tower server case with a panaflo 105cfm inlet fan and 2 80mm 30cfm fans rear...also a pcp&c 610 p/supply...the case is wider than a normal atx midtower and i made a side window..heat is literally blown out of this case...I use speedfan for temps and also nxsensor and core temp..all are the same readings....my cable routing is almost perfect for airflow too...I live in fla and i hate heat...ive had no hardware failures on my personal rigs for many years and i attribute this to great power supplies and over the top cooling...my house temp is always around 76-78f.....motherboard temp or NB right now reads 30c and pwm is 33c and cpu is 36c...I have lapped the pwm heatsink and have a small fan on it too...lapping it helped alot....
 
I use a freezer 64 cooler and my case is a wind tunnel...mid tower server case with a panaflo 105cfm inlet fan and 2 80mm 30cfm fans rear...also a pcp&c 610 p/supply...the case is wider than a normal atx midtower and i made a side window..heat is literally blown out of this case...I use speedfan for temps and also nxsensor and core temp..all are the same readings....my cable routing is almost perfect for airflow too...I live in fla and i hate heat...ive had no hardware failures on my personal rigs for many years and i attribute this to great power supplies and over the top cooling...my house temp is always around 76-78f.....motherboard temp or NB right now reads 30c and pwm is 33c and cpu is 36c...I have lapped the pwm heatsink and have a small fan on it too...lapping it helped alot....

i just place an order for Arctic Cooling Freezer 64 Pro and 3x120mm 2000 RPM 78 CFM so this should keep my case nice and cool
 
Back