Those sticks if they are the exact same brand, size, and style should go in slots 1 and 3 which would be the first one and the blue slot. If you want to continue the dual channel with more memory you will have to get the same brand and style but order a 1gig stick of it and place it in slot 2.
Slot 1 is closest to the cpu, #3 is farthest away. Running in dual mode won't get you much more in the way of performance because the bus can't handle anymore data. It can also reduce your overclock.
1 and 3 is dual channel for sure - right after you post it should say "dual channel" - that's how you know.... OR.... get cpu-z and look in the memory tab - you will see "DUAL"
Weird, slots 2 and 3 for me make it dual channel. I checked with CPU-Z. And as for it posting as dual channel, the 1003 bios won't tell you, but the 1004 bios will. At least that is my experience.
pull out the CD you got with your epox board... and install magic flash utility...
then it should be fairly straight-through from that point... oh yeah, take your overclock down to stock before you update it... last thing you want to do is crash while its flashing
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.