albatron 915p board

Albatron board
2.8lga
albatron pcx5300
2*256 crucial 3200
stock cooler

The board has a cpu freq 200-333
vcore 0.025-1.9
vdimm default to +.4
nb volts default to +.3
pci e auto/100
ram settings auto/2/2.5/3
pci auto/33/37/44
board also has peg force X1
system mem auto/333/400

I am currently using 5/26/04 bios compiled on that date.
reached 265fsb
1.5375vcore
Mem 5/4 212
timings 2.5/3/3/7
ddr +.4
nb+.3
vid card clocks 305/533
The board is running nicely but I need a new cooler.
The stock one just cant handle the temps.
Will get another one tomorrow, thermaltake big *** cooler.

265fsb is the highest this board will go.

That's as far as the board will go, or as far as your specific processor will go? I've owned several of Albatron's flagship Intel boards (the PX845PE Pro IIs and currently the PX865PE Pro II) and both of which stabily hit at least 45% overclock versus stock (PX845PE rated at 100/133 ran at 208FSB for 30hrs prime stable, PX865PE rated at 200FSB ran at 292FSB for ~40 hours in memtest stable)

The 845 board pretty much hit it's wall at that 208FSB point, which is pretty incredible considering the 845 chipset and the general cost of that board. The 865 board hit the processor limit at 1.6v, and without a hard voltmod I couldn't get any further. It's quite likely the motherboard had more in it...