- Joined
- Dec 13, 2006
I have a
E6400,
P5B-DX
ballistix PC8000 dual 2GB http://www.newegg.com/Product/Product.asp?Item=N82E16820146563
Scythe Infinity with mount mod
430W seatronics PS - basic video card - so this is more than enough good power/amps
if i basically max out all voltages in the bios (including vcore ) and set multiplier to 8 and start increasing the FSB i can get to 3.6 stable - i can then reduce all voltages a long way down and remain stable
- runs orthos for 30 mins - temps around 65C (just for testing)
if i go to 3.7GHz - gets to windows - but then very unstable.
I noticed on all my testing that i needed the memV Vdimm set to 2.45 to get stability at most speeds. timmings are (5-5-5-15)
Do you think this is where my problems are at ??? - as I can not increase this in the bios anymore - is this what the VDIMM mod is for ????
What do you think the max vdimm can be (for testing not 24/7) ?
also since the board underclocks by 0.25V and the memory is rated at 2.2V - do you think my Vdimm (bios 2.45) is really only 2.2'ish aswell ???
when in windows what can I use to see VDimm ?
Merry Xmas everyone !!!!!!