Hello everyone! Have a few questions to ask. I currently have a P4 and am going to upgrade to a C2Q by the end of the year. So I decided to start slowly buying a few new things like a PSU, Case, and build a WC setup.
This is what my setup is so far
Rad: http://www.petrastechshop.com/swmcqposerab1.html
Cpublock: http://www.petrastechshop.com/dfuuncpubl1.html
Pump: http://www.petrastechshop.com/swmcin12pu.html
Tubing: http://www.petrastechshop.com/7id5odmagepu.html
Res: http://www.petrastechshop.com/swmchire.html
So here are my questions
1) Is there anything missing in my setup or something I should change?
2) I noticed the rad has plastic barbs is that a problem and should be changed out?
3) What speed Yateloon fans should I use with this Rad in a pull config, I see they have a good deal on them at this site.
http://www.nexfan.com/yate-loon-all-...le-speed-.html
4) Will the Cpu block work for a P4 and will I be able to reuse it down the road for a C2Q
5) Any problems with mixed metals that could cause corrosion?
This is what my setup is so far
Rad: http://www.petrastechshop.com/swmcqposerab1.html
Cpublock: http://www.petrastechshop.com/dfuuncpubl1.html
Pump: http://www.petrastechshop.com/swmcin12pu.html
Tubing: http://www.petrastechshop.com/7id5odmagepu.html
Res: http://www.petrastechshop.com/swmchire.html
So here are my questions
1) Is there anything missing in my setup or something I should change?
2) I noticed the rad has plastic barbs is that a problem and should be changed out?
3) What speed Yateloon fans should I use with this Rad in a pull config, I see they have a good deal on them at this site.
http://www.nexfan.com/yate-loon-all-...le-speed-.html
4) Will the Cpu block work for a P4 and will I be able to reuse it down the road for a C2Q
5) Any problems with mixed metals that could cause corrosion?