- Joined
- Sep 19, 2002
- Location
- the bluegrass state
first i would like to thank every one that posted at my other two threads on getting strated with water coolers!
ok, i got my water setup in, after doing a case mod for the radiator. maby i am wanting too much but i thought i would get a little better results. i'll give you the rundown on the air cooling settup i was using compared to the water cooling setup.
air settup:
volcano7 heatsink with vantec 85cfm 80mm fan.
was running 12x200@2400mhz with [email protected], 35c idle and 41c on full load.
water settup:by Logic Cooling
db-2 waterblock with sping clamps
radiator with shroud and 120mm panflo
Lt700 inline pump
all 1/2" barbs, and lines
running 12.5x200@2500mhz with [email protected], 35c idle and 41c full load.
water flow:from pump to radiator, to waterblock, back to pump. no resivior. using t line settup. using distilled water with zerex anti corrosion protectant (by valvoline)
does evrything sound o.k.? it is not performing much better than my air cooling settup? but it is 100% quieter. don't like using the spring clamps, guess i'll get a socket clamp later.
any feedback would be nice thaks!
ok, i got my water setup in, after doing a case mod for the radiator. maby i am wanting too much but i thought i would get a little better results. i'll give you the rundown on the air cooling settup i was using compared to the water cooling setup.
air settup:
volcano7 heatsink with vantec 85cfm 80mm fan.
was running 12x200@2400mhz with [email protected], 35c idle and 41c on full load.
water settup:by Logic Cooling
db-2 waterblock with sping clamps
radiator with shroud and 120mm panflo
Lt700 inline pump
all 1/2" barbs, and lines
running 12.5x200@2500mhz with [email protected], 35c idle and 41c full load.
water flow:from pump to radiator, to waterblock, back to pump. no resivior. using t line settup. using distilled water with zerex anti corrosion protectant (by valvoline)
does evrything sound o.k.? it is not performing much better than my air cooling settup? but it is 100% quieter. don't like using the spring clamps, guess i'll get a socket clamp later.
any feedback would be nice thaks!
Last edited: