- Joined
- Nov 2, 2003
- Location
- South of Boston
testbed in sig, mulitplier was kept at 14x and dividers were used for higher speeds. my prommy needs repair so i can't (if i wanted to) run prime95 or the like without overloading my cooling, so superpi 1m was all that was used to test stability.
PQI Turbo pc2-5400 2x1gb 4-4-4-12
4-4-4-12 4:5
1.8v 363mhz
1.9v 368mhz
2.0v 368mhz
2.1v 368mhz
2.2v 368mhz
2.3v 372mhz
notes: i only gained 1mhz when switching to cas5. i didn't want to test 5-5 timings because it's too sloppy for me.
4-3-3-10 1:1
1.8v 275mhz
2.1v 281mhz
2.3v 281mhz
4-2-2-8 would not boot, even at 200mhz 2.3v
Centon 2x512mb with Micron D9DQW (pic attached so you can see what d9 looks like)
I only tested this ram at 2.3v.
4-2-2-8 3:4 = 338mhz
5-2-2-8 3:4 = 346mhz
5-3-3-10 2:3 = 460mhz
Mushkin PC2-6400 2x512mb 5-3-3-8
Thanks Sentential for your results. He tells me these were stable results, with no active cooling. He also has a P5WD2-Premium.
5-4-4-10
1.9 474mhz
2.0 484mhz
2.1 502mhz
2.2 516mhz
2.3 524mhz
5-3-3-8 3:5
1.9v 452mhz
2.0v 466mhz
2.1v 492mhz
2.2v 514mhz
2.3v 522mhz
5-2-2-8
2.2v 348mhz
2.3v 358mhz
Sorry for the short review, I just wanted to see what these sticks can do. Hope it's helpful, I hate the lack of reviews out there with a decent testbed.
PQI Turbo pc2-5400 2x1gb 4-4-4-12
4-4-4-12 4:5
1.8v 363mhz
1.9v 368mhz
2.0v 368mhz
2.1v 368mhz
2.2v 368mhz
2.3v 372mhz
notes: i only gained 1mhz when switching to cas5. i didn't want to test 5-5 timings because it's too sloppy for me.
4-3-3-10 1:1
1.8v 275mhz
2.1v 281mhz
2.3v 281mhz
4-2-2-8 would not boot, even at 200mhz 2.3v
Centon 2x512mb with Micron D9DQW (pic attached so you can see what d9 looks like)
I only tested this ram at 2.3v.
4-2-2-8 3:4 = 338mhz
5-2-2-8 3:4 = 346mhz
5-3-3-10 2:3 = 460mhz
Mushkin PC2-6400 2x512mb 5-3-3-8
Thanks Sentential for your results. He tells me these were stable results, with no active cooling. He also has a P5WD2-Premium.
5-4-4-10
1.9 474mhz
2.0 484mhz
2.1 502mhz
2.2 516mhz
2.3 524mhz
5-3-3-8 3:5
1.9v 452mhz
2.0v 466mhz
2.1v 492mhz
2.2v 514mhz
2.3v 522mhz
5-2-2-8
2.2v 348mhz
2.3v 358mhz
Sorry for the short review, I just wanted to see what these sticks can do. Hope it's helpful, I hate the lack of reviews out there with a decent testbed.
Attachments
Last edited: