@sam! Done what's you said still no luck.I gave up that Ram and put the old one back (trencend PC6400)
Wtith Bios setting
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto
CPU Clock Ratio ..........................:X7
CPU Frequency ...........................:3.08GHz (440x7)
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 440
PCI Express Frequency (Mhz) .........:100
C.I.A.2 .................................:[Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: <<< 800
PCI Express Clock Drive.................: <<< 800 [set 900]
CPU Clock Skew (ps)....................: <<<
MCH Clock Skew (ps)...................: <<<
DRAM Performance Control
Performance Enhance...................: [STANDARD]
Extreme Memory Profile (X.M.P.).....: [Auto] set to Disable prime run about 5-10' some core stop with same setting
(G)MCH Frequency Latch...............: [400MHz]
System Memory Multiplier ..............:2.00D
Memory Frequency (Mhz) ..............: 800 [886]
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time........................6 [6]
tRCD .........................................6 [7]
tRP'...........................................6 [7]
tRAS..........................................18 [18]
Advanced Timing Control [Press Enter]
tRRD.......................................4 [Auto]
tWTR.......................................4 [Auto]
tWR........................................6 [Auto]
tRFC.......................................56 [52] found 52 better than leave [Auto] or other number
tRTP.......................................4 [Auto]
Command Rate (CMD).........................0 [Auto]
Motherboard Voltage Control
Load-Line Calibration..................: [Disabled]
CPU Vcore..............................:1.25000 [1.35000V] this setting better than 1.36250v
CPU Termination........................:1.200V [1.3400V]
CPU PLL................................:1.550V [Auto]
CPU Reference..........................:0.8050V [Auto]
MCH Core...............................:1.100V [AUTO]
MCH Reference..........................:0.7600V [Auto]
ICH I/O................................:1.550V [Auto]
ICH Core...............................:1.100V [Auto]
DRAM
DRAM Voltage ..........................:1.800V [2.08V] better than 2.1v
Prime over 3 hour,but the temperature at max look too high @ 72/68/69/70. You know what's the temp safe for running that CPU?