C
CPIETRAS
Guest
what can I expect to see for speeds? I got a asus pt4-e. I was "only" able to get my 1.6 to 2100+. No pin mod, just straight fsb, and air cooling
-
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
2.2 northwood
Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.
- Joined
- Oct 5, 2001
- Location
- Ottawa, Canada
Probably 2.7 with good air cooling.
Why not keep the 1.8a? Your bus would run much higher on the low end Northwood then it would on the high and it would probably have a similar outcome and a big price difference.
Why not keep the 1.8a? Your bus would run much higher on the low end Northwood then it would on the high and it would probably have a similar outcome and a big price difference.
- Joined
- Dec 23, 2001
- Location
- Where the hottest chicks reside!
I'm @ 2.7Ghz rock stable aircooled.. and it's climbing 
.. I ran it @ 2.8 but it reboots after a while, not CRASHING! .. which means not enough juice .. I'll get 400watt PSU and I'll try again!
.. I ran it @ 2.8 but it reboots after a while, not CRASHING! .. which means not enough juice .. I'll get 400watt PSU and I'll try again!
- Joined
- Jan 15, 2001
- Location
- Denver, CO
At least 2.6+ with good air cooling and voltage of around 1.65.
- Joined
- Jan 11, 2002
- Location
- tOLEDO, OHIO, the heart of it all!
you think that he can go up 400mhz with only 1.65v?TC said:
- Joined
- Jul 25, 2004
TC said:
gf's rig i oc'd 2.2 northwood to 2.97ghz. stock cooling.
22*133 agp 66 pci 33. some asusu board didnt touch the voltage.
idles at 42, full load at 52 stable.
- Joined
- Jan 12, 2001
- Location
- Kansas, USA
Another thread from the grave. Depends a lot on what stepping. The early B0 steppings didn't do as well as the later Northwoods. I had a B0 2.0A that would only do about 2.5 gig. Later I got a 2.0A C1 stepping that did 3.4 gig.
Similar threads
