AMD Athlon 64 X2 4050e OC

[suassive]

So I managed to overclock this processor on a ASUS motherboard with few different values. Take a look.

Computer Specs:

Windows 10 64-bit
4 Gigs of RAM
AMD Athlon 64 X2 4050e (Original Clock Value = 2.10Mhz)
Asus M2A-VM HDMI Motherboard
Phoenix - AwardBIOS v6.00PG ACPI BIOS Revision 2302

Working Values w/ Aircooling:

Multiplier = 10.5 x
BUS/Frequency = 225 Mhz
Volts = 1.250 V
= 2.50Mhz
Multiplier = 10.5 x
BUS/Frequency = 250 Mhz
Volts = 1.250 V
= 2.65Mhz
Multiplier = 10.5 x
BUS/Frequency = 260 Mhz
Volts = 1.250 V
= 2.73Mhz
Multiplier = 10.5 x
BUS/Frequency = 270 Mhz
Volts = 1.250 V
= 2.83Mhz

Experimental Values w/ Aircooling: (I've had trouble with these on Windows but the computer still turned on fine) (it may or may not work for you guys)

Multiplier = 10.5 x
BUS/Frequency = 280 Mhz
Volts = 1.250 V
= 2.94Mhz
Multiplier = 10.5 x
BUS/Frequency = 290 Mhz
Volts = 1.325 V
= 3.04Mhz
Multiplier = 10.5 x
BUS/Frequency = 300 Mhz
Volts = 1.350 V
= 3.15Mhz

I also have done benchmarks to test the heat capacity it gets in Celsius for 1 hour but it didn't get any higher than 55C maximum the minimum is between 40C-52C
Ps: ( I also have 5 fans in my tower that could also be a key benefit on why it's so low (excluding the CPU fan then that would be 6 fans in total) )

 

[trents]

Have you actually done some real stress testing? I'm not talking about running benchmarks. Around here we consider passing at least two hours of Prime95 blend to be the defacto proof of stability. If your overclock is stable under that load then you have a nice overclock for that chip.

 

[Mr.Scott]

you have a nice overclock for that chip.

Eh...it's average at best.