can't change "CPU core voltage override" value

[Kuksii]

Hi All!

My 1st thing: sry for my poor english, I'm Hungarian.

My problem: in manual mode, if I set ANY "CPU core voltage override" value in place of "auto", my system can't boot. Boot is breaking with "36" error code. According the MOBO's user guide: 36= "CPU post-memory initialization".

My RAMs are good(1,65 V) and worked fine, with no issue in s1155 ASRock Extreme3Gen3 MOBO with 2500K, 2600K and 3770K processors.

I have up-to-date BIOS(2103-15/08/2014)and I reflashed, cleared CMOS with jumper,but the problem is still remain.

MOBO: Asus Z87 Expert
CPU : 4770K
RAM : 8 GB Kingston HyperX Blu (1,65 V)

I hope my text is understandable.

Thanks for help.

 

[Johan45]

Welcome to OCF Kuksii
So you have the voltage control set to manual and set the cpu voltage override to 1.25v using the +or - key, should be able to type it in as well then hit enter. This should work, if not then something else has been changed. Try doing this without changing CPU frequencies.

 

[bamato]

Are you sure you aren't under-volting the cpu mistakenly?

 

[Kuksii]

OMFG!

This my fault. Sorry for time robbery.

 

[Johan45]

Ha, we all do it Kuksii, no big deal just happy you have it sorted out now.

 

[Kuksii]

Thanks Johan

 

[Johan45]

Don't mention it, that's why we're here.