- Joined
- Aug 9, 2001
- Location
- Southern Cali
Ok I am really new to this game but I have read hundreds of pages here and elsewhere so I hope i am learning.
Here's what I have so far:
Epox 8K7a+
Athlon 1.33 AHYJA
Crucial PC2100/DDR (256 x 2)
SwifTech MC462-A rev 1 hsf
Radeon 64 DDR
SB live 5.1+
IBM 60GXP (20 gig x 2) RAID 0
Sony CDR
Sony Floppy
Current (stable so far) settings
10.5 x 133
for a total of 1473 Mhz ?
the system is currently (and all last night running Prime95)
Temp's: CPU- 40 c, system - 33c and there is another sensor that I am not sure what it is monitoring but it reads 24c.
what should I do next? I am stuck at the 10.5 multiplier everytime I tried to increase it the system wont boot at all, I went to 11.5, and then back to 11.0 and got locked out, so then I tried to increase the core voltage by one notch (+0.1v) and that didnt help...still locked out w\either of those settings, then I
went back to the 10.5 setting and it booted.
5v is at 4.80v
Core 0 is at 1.78v
Core 1 is at 1.54v
Should I try increasing the FSB by 1 click at a time? should I be worried about the 5v readout? I am willing to try and push this thing a little harder....I think I have good components here but what do you guys think? where is the limit?
Here's what I have so far:
Epox 8K7a+
Athlon 1.33 AHYJA
Crucial PC2100/DDR (256 x 2)
SwifTech MC462-A rev 1 hsf
Radeon 64 DDR
SB live 5.1+
IBM 60GXP (20 gig x 2) RAID 0
Sony CDR
Sony Floppy
Current (stable so far) settings
10.5 x 133
for a total of 1473 Mhz ?
the system is currently (and all last night running Prime95)
Temp's: CPU- 40 c, system - 33c and there is another sensor that I am not sure what it is monitoring but it reads 24c.
what should I do next? I am stuck at the 10.5 multiplier everytime I tried to increase it the system wont boot at all, I went to 11.5, and then back to 11.0 and got locked out, so then I tried to increase the core voltage by one notch (+0.1v) and that didnt help...still locked out w\either of those settings, then I
went back to the 10.5 setting and it booted.
5v is at 4.80v
Core 0 is at 1.78v
Core 1 is at 1.54v
Should I try increasing the FSB by 1 click at a time? should I be worried about the 5v readout? I am willing to try and push this thing a little harder....I think I have good components here but what do you guys think? where is the limit?