I have an AMD FX55 OC'd to 3052MHz I use water cooling that keeps it around 46*C full load and 34*C Idle, it has been running very stable for about a month now, I achieved this setting by changing the HT to 4x, the base clock to 218 and the multiplyer to 14x and it will only run stable at 1.55v, that is the highest voltage setting my MoBo will allow(I'm sure I've screwed up my terminology) I have Corsair XMS Pro series DDR 400 with a stock timing of 3-3-3-8, it is now set to 2-3-3-7. ANYWAY! if I try to push it any further it becomes completely unstable, I was just wondering if anyone has achieved higher clock speeds and how, and if there is any way I can push it further with what I have. Also, does changing the frequency to the PCI-Ex in BIOS help improve the GPU performance?
AMD FX55
ASUS A8N5X Mobo
Corsair XMS Pro 2x1Gb (2048)
WD Raptor HDD Serial ATA150 74Gb
Antec Truepower 550w SLI PSU
eVGA 7900GT
Thermaltake Bigwater Liquid Cooling System
AMD FX55
ASUS A8N5X Mobo
Corsair XMS Pro 2x1Gb (2048)
WD Raptor HDD Serial ATA150 74Gb
Antec Truepower 550w SLI PSU
eVGA 7900GT
Thermaltake Bigwater Liquid Cooling System
Last edited: