In 3dmark 200 ver. 1.1...it happens about 2 seconds into the 3rd test, the high detail helicopter. I took out my slow (128mb x 100 mhz) RAM stick, and left the 256mb x 133 stick in (in dimm 1), and cleared the bios, left everything at the default settings (except for setting the cpu back to 1.33, which is what it is)...my HSF isn't great, but it's very cool, tonight, heat shouldn't be the prob. 23c, right now, with vcool on, I tried running the tests with, and without, vcool, and RAMpage on. Nothing else running. Sandra says everything's fine. (I even tried 12 x 121fsb, and 11.5 x 125fsb, with the pci bus at 100mhz, and it seemed ok, until I ran 3dmark) Could it be the voltage? I don't have a setting above 1.85. This is frustrating. I've had all kindsa probs with this card (Giga-Byte brand, no fan, but it seems cool enough to the touch) Specs:
AMD Athlon 1.33
Abit KT7A, 4.33 4-in-ones, installed in 'normal', not turbo mode
Giga-Byte GeForce2 MX 400 32mb, ver. 12.41 drivers (I have the 21.83's, and I can get the 12.85's, but I figure it should at least finish the d***** test, with the 12.41's)
cheap Bestek sound card, in slot 4(C-Media 18738 chipset, tried board drivers, using chipset drivers)
Cnet pro200 nic card
LG 8080b cd-rw, manufacturor's drivers
generic floppy
H-P D7405B 15" monitor, from a pavilion, generic windoze drivers
300 watt power supply
256 mb Kingston ram, 133 mhz
I'm probably leavin a buncha stuff out, if anyone could please, please help me, I'll provide any other info ya need
AMD Athlon 1.33
Abit KT7A, 4.33 4-in-ones, installed in 'normal', not turbo mode
Giga-Byte GeForce2 MX 400 32mb, ver. 12.41 drivers (I have the 21.83's, and I can get the 12.85's, but I figure it should at least finish the d***** test, with the 12.41's)
cheap Bestek sound card, in slot 4(C-Media 18738 chipset, tried board drivers, using chipset drivers)
Cnet pro200 nic card
LG 8080b cd-rw, manufacturor's drivers
generic floppy
H-P D7405B 15" monitor, from a pavilion, generic windoze drivers
300 watt power supply
256 mb Kingston ram, 133 mhz
I'm probably leavin a buncha stuff out, if anyone could please, please help me, I'll provide any other info ya need