I confirm TMPIN2 on Gigabyte Board is NB temp..

[Leito]

Beta - Mmmm... I'm lovin' it

Here is the screen...

http://oi45.tinypic.com/nlsqox.jpg

I will try to load the PC a little now and post the results of it...

Thanks tikithorsen

 

[tikithorsen]

I'm glad I was of any help.

If you click on: "View>Show hidden sensors" You will see all the rest of the voltages and you can also rename, hide or show it on the gadget.

 

[Leito]

Thanks for those tips. That's the gadget which I needed...

After some averange requerement game:

http://oi46.tinypic.com/30ldojt.jpg

After something, about 20 or evel less minutes at PRIME95:

http://oi49.tinypic.com/2z9cmc5.jpg

I've downclocked my last OC a little... The FSB from 214Mhz to 210Mhz (from 3210Mhz to 3150Mhz of CPU cores, and the memory clock automatically from 1426Mhz to 1400Mhz).

I didn't want to check my stability etc. I Just wanted to be sure, that the TEMPERATURE#2 is the sensor of the CPU from the motherboard. When i hit the 60*C the BIOS BEEPed again. So i know what is the TEMPERATURE#2.
The TEMPErATURE#3 is this, what I was talking about in earlier post - it's always on the 79, 80 or 81 *... So the TEMPERATURE#1 is the temperature of the My Northbridge? PRIME95 is not making any load on it?

EDIT:

I Left My PC "sleept" on a couple of minutes, and TEMPERATURE#1 after waking up was on 33*C. So i think, that I Found a program and sensor, that I can check My NORTHBRIDGE temperatures. Thanks... Tomorow i will do some tests while gaming and check out what temperatures it's gonna get on that kind of load... I won;t forget, to post a results here

Thanks a lot tikithorsen!

 

[Leito]

Hello!

Sorry for that late post...

I know, that i had to add some infos, about temps while gaming - i just don't have got much time for it now...

Anyway, as I wrote

Beta - Mmmm... I'm lovin' it

Yesterday I've turned ON the PC and the Cores clocks were for Me a little strange
http://oi47.tinypic.com/qn0ne8.jpg
http://oi47.tinypic.com/28m2skk.jpg
http://oi47.tinypic.com/2e66fea.jpg

First - I was scared and thought, that i have some bios fail and somehow My "BUS SPEED" increased from 214 to 262 But i don't think, that booting up on this value is possible on stock voltages... Anyway it is still 1747 Mhz for the memory, but i am using Vengeances, which are prepared to run at 1600max at stock, without changing voltages - ram would fail booting up too... So i wondered how is it possible? And turned on the CPU-Z - here everything was OK And after restarting the Open hardware monitor the values were normal again. So I think that's why it is still BETA... I'm writing this to warn You about that little issue with this software. Except that i didn't notice anything wrong with it.

Regards
Leito

 

[tikithorsen]

Wierd, I never had that issue, thought I always double check everything with CPU-Z.