I am going to order a new ASUS p5gdc-v but i need a new psu for it since i am going from an older 1.8 p4. I need to know if either of these would work with the new style board:
Fortron 400W Power Supply For Intel P4 and AMD XP CPU, Model "FSP400-60PFN"
Type: ATX
Maximum Power: 400W
PFC: Active
Power Good Signal: 100-500ms
Hold-up Time: 17ms min.
Efficiency: Min 65%,Typical 70% (at full load)
Over Voltage Protection: +5V ; +3.3V ; +12V
Overload Protection: Not specified
Input Voltage: 100-240 VAC Full Range
Input Frequency Range: 47Hz-63Hz
Input Current: 5A
Output: +3.3V@28A;+5V@40A;[email protected];+12V@15A;[email protected];+5VSB@2A
MTBF: 100,000 hrs. @ 25ºC
SilverStone Tech. 400W Super Silent Power Supply w/ 120mm Fan and SATA Connector, SST-ST400
Type: ATX
Maximum Power: 400W
PFC: No
Power Good Signal: Not specified
Hold-up Time: 14ms @ full load
Efficiency: Not specified
Over Voltage Protection: Not specified
Overload Protection: Not specified
Input Voltage: 100 - 127/220 - 240 VAC Manual selectswitch
Input Frequency Range: 47-63Hz
Input Current: 8A/4.5A
Output: +3.3V@28A,+5V@35A,[email protected],+12V@18A,[email protected],+5VSB@2A
MTBF: 100,000 HRS
I'm not into multi drives and overclocking right now so i just need somthing to get me by for a bit.
Or any recemndations?
I'm limited to about $50
TIA
Obiwan
Fortron 400W Power Supply For Intel P4 and AMD XP CPU, Model "FSP400-60PFN"
Type: ATX
Maximum Power: 400W
PFC: Active
Power Good Signal: 100-500ms
Hold-up Time: 17ms min.
Efficiency: Min 65%,Typical 70% (at full load)
Over Voltage Protection: +5V ; +3.3V ; +12V
Overload Protection: Not specified
Input Voltage: 100-240 VAC Full Range
Input Frequency Range: 47Hz-63Hz
Input Current: 5A
Output: +3.3V@28A;+5V@40A;[email protected];+12V@15A;[email protected];+5VSB@2A
MTBF: 100,000 hrs. @ 25ºC
SilverStone Tech. 400W Super Silent Power Supply w/ 120mm Fan and SATA Connector, SST-ST400
Type: ATX
Maximum Power: 400W
PFC: No
Power Good Signal: Not specified
Hold-up Time: 14ms @ full load
Efficiency: Not specified
Over Voltage Protection: Not specified
Overload Protection: Not specified
Input Voltage: 100 - 127/220 - 240 VAC Manual selectswitch
Input Frequency Range: 47-63Hz
Input Current: 8A/4.5A
Output: +3.3V@28A,+5V@35A,[email protected],+12V@18A,[email protected],+5VSB@2A
MTBF: 100,000 HRS
I'm not into multi drives and overclocking right now so i just need somthing to get me by for a bit.
Or any recemndations?
I'm limited to about $50
TIA
Obiwan