- Joined
- Dec 12, 2009
Hi,
I just finished building a system with an MSI H55M-P31, a core i3 530, OCZ DDR3 1066, Saphire Readeon 5670, seagate barracuda, 700W Ultra PSU and samsung 22X burner. Everything is assembled correctly, but I get no video signal and no POST sounds. I have unplugged the graphics card and tried it in another system and it works fine, I've also tried plugging the monitor into the integrated VGA graphics as well as the discreet card. The system is getting ample power, as I have tried the PSU in a much more powerful system and it was fine. Both 4pin and 24pin powers are plugged in. I was able to get the board to post once by plugging the VGA cable into the integrate graphics after I started the system, but I can not replicate this.
Any help would be enormously appreciated!
Thanks
I just finished building a system with an MSI H55M-P31, a core i3 530, OCZ DDR3 1066, Saphire Readeon 5670, seagate barracuda, 700W Ultra PSU and samsung 22X burner. Everything is assembled correctly, but I get no video signal and no POST sounds. I have unplugged the graphics card and tried it in another system and it works fine, I've also tried plugging the monitor into the integrated VGA graphics as well as the discreet card. The system is getting ample power, as I have tried the PSU in a much more powerful system and it was fine. Both 4pin and 24pin powers are plugged in. I was able to get the board to post once by plugging the VGA cable into the integrate graphics after I started the system, but I can not replicate this.
Any help would be enormously appreciated!
Thanks