Rampage IV Extreme good ram quad ram?

[RainbowUnicorn]

I have a Rampage IV Extreme motherboard with a 3930k and I currently have G.SKILL Trident X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2800 (PC3 22400) Desktop Memory Model F3-2800C11D-8GTXDG but it's not running at full performance . Don't ask why I bought them in the first place . I have noticed that I tend to run out of ram since I like to live steam and what not . I'm looking for some good Quad Ram . Not too expensive please but at the same time not cheaply build ram, the motherboard supports DDR3 2400(O.C.)/2133(O.C.)/1866/1600/1333/1066. Thanks

 

[ivanlabrie]

I'd go for a quad 2133mhz cl9 kit...It's bound to be hynix mem, and it should perform fine at stock and overclock decently too. Your cpu's memory controller may not be able to run 2800mhz mem, very few 3930k's go over 2400mhz.

 

[RainbowUnicorn]

Links to some recommended ones ?

 

[RainbowUnicorn]

I'd go for a quad 2133mhz cl9 kit...It's bound to be hynix mem, and it should perform fine at stock and overclock decently too. Your cpu's memory controller may not be able to run 2800mhz mem, very few 3930k's go over 2400mhz.

I'm looking at some but those are really expensive. I'm looking for over 8GB and Price Range 0- 150 with 150 being the absolute max . . .

 

[TheHutchTTU]

What do you think about these?

$140 4x4GB 2133MHz CL10

 

[EarthDog]

ANy DDR3 1866 CL9 1.5v would be fine. I would **** if I saw 2400Mhz memory on X79 24/7.

 

[ivanlabrie]

ANy DDR3 1866 CL9 1.5v would be fine. I would **** if I saw 2400Mhz memory on X79 24/7.

Hey, mine does 2300mhz for 24/7, with 1.1v vtt/imc and 1.65v pll...and 1.75v for dram. Close enough xD

 

[Woomack]

http://www.newegg.com/Product/Product.aspx?Item=N82E16820231555 probably older Hynix CFR as CL9 were only on CFR -> read as much better than new CFR or single sided MFR
or
2 kits of these http://www.newegg.com/Product/Product.aspx?Item=N82E16820313234
probably Samsung, 2133 CL9 and 1.5V looks pretty promising

 

[ivanlabrie]

Those team group sticks look nice...not too bad pricing for what they are.

 

[Sabishiihito]

ANy DDR3 1866 CL9 1.5v would be fine. I would **** if I saw 2400Mhz memory on X79 24/7.

Running 2400 24/7 on my X79 RIVE setup, using this kit: http://www.newegg.com/Product/Product.aspx?Item=N82E16820231521

My 3820 has a strong IMC though, I've managed DDR3-2666 Super Pi 32M stable.

 

[ivanlabrie]

Running 2400 24/7 on my X79 RIVE setup, using this kit: http://www.newegg.com/Product/Product.aspx?Item=N82E16820231521

My 3820 has a strong IMC though, I've managed DDR3-2666 Super Pi 32M stable.

Jelly! Mine won't pass 2300

 

[EarthDog]

Running 2400 24/7 on my X79 RIVE setup, using this kit: http://www.newegg.com/Product/Product.aspx?Item=N82E16820231521

My 3820 has a strong IMC though, I've managed DDR3-2666 Super Pi 32M stable.

****s.