What's your voltage? [retired sticky]

[Ziggey]

Didn't expect to see 1.75 so low on the voltage scale. But I don't think mobiles were around in force back then.

 

[Natti]

got it runnin at 1.8v right now...200.45x13=2605.91mhz. its at 40 on full load. haven't fully tested the stability yet, prime is in its 2nd hour of testing now.

 

[Samurai Jack]

1.85v on air. Run up to 2580 stable when I want to. Can bench at 2620.

SJ

 

[Fangs404]

1.75V (in bios, at least....1.7V in windows) with my mobile 2500+ at 2.5ghz (see sig).

 

[iBreaker]

my t-bred 2400+ @11*223 is running @2.0V on my an35nu ==>103W are dissipated, but my revoltec liquidIcer keeps it under 40° full load.

 

[Spion]

i got a xp2500+(desktop) 200*11 2200MHz 1.65v.

:edit: burn-in is working!!!!

 

[mjw21a]

Have run my system a at 11 x 216 (2377MHz) @ 1.85V (actually 1.9V as my mobo overvolts).

Currently running it at 11 x 210 (2315MHz) @ 1.8V (really 1.85V) as my little 330W PSU couldn't keep up. Voltage readings were all over the place, so the system wasn't 100% stable.

Even as it is now, I don't have enough power for my single cold cathode to run.....

I think I need to get a mobile CPU + new PSU......

 

[korruptedONE]

CG Newcastle 3200+ @ 2583 Mhz stable running 1.7 volts. BIOS says 1.8v but K8N Neo BIOS reports .1v higher than what is actually being used (verified by CPU-Z). Running an SLK-948U and Vantec Tornado fan. Really want that 2.6Ghz but more power doesn't do jack.

 

[baberpervez]

Yuran I'm impressed by your 2000+ performance (2.4Ghz! Wow!).

Mine is a 2200+ (1.8Ghz) running at 2.11 Ghz at 1.7v.

 

[Rich Avery]

I had a Tbred XP2800 which did prime95 for 12 hours no errors at 220x11x1.92 48-50'c idle 55-60 load. Which was 2.0vcore in the bios, 1.95 gave me hangs or reboots.

Now I have got on the mobile bandwagon and have my 2600 IQYHA at 200x12x1.65 38'c idle on very good/excentric air system which i'm quite chuffed about, looks like i'll be seeing 2.6ghz+ soon I strongly recommend these chips..

 

[spookeboom]

AMD Athlon XP-M 2500+ Barton (IQYHA 0409)
multy = 11.5
fsb = 210.5
clock = 2420Mhz
Soltek SL-75FRN2-L
Geforce FX5200 @ 128mb
Infineon 512 DDR400 PC3200 Ram
Thermalright SLK-700 Solid Copper @ 35.5cfm

temps 35deg idle 43deg loadhttp://www.ocforums.com/oc_images/images/icons/icon14.gif
Thumbs up

 

[Aceshigh]

AMD64 running 1.47V ocing 1224mhz to a grand total of 3624mhz..... yeahhhh i think corecell is a cracked out program...

 

[Loon3y]

voltage = 1.75V with my 2500+ barton @ 2400 mhz i can only go up to 1.8V then im maxed out i was thinking about a volt mod but me and solder do not go in the same sentence

 

[Rich Avery]

1.92 ABITEQ 1.95 in bios - 220x11.5 2.535ghz 35'c idle. It totally stable after some hard gaming P95. I managed to burn it in at 1.8vcore for eight hours, still burning in though. It needed 1.95 [2.0 in bios] before any burning..

I've tried 220x12 but it needs alot more vcore to get there, like 2.1 which I find very strange as in my experience 110mhz usually needs only around 0.1v more... even at 2.1 it's not stable [2.64ghz] and my temps go way up with that amount so i'm not going to run it there unlless burning in some more helps!!

 

[pdogtun]

3400+ newcasltle in the green packing

Pdogtun
AMD 64 3400+ (512) @ 2.76 Ghz (12 * 230) @ 1.65 volts
Heat sink: thermalright XP 120 (temps 32c idle, 45C load)
Ram: 512 OCZ 3200 Platium (2 x 512mb) @ (1:1)
HTT: 1840 MHz [(4X230) X 2]
MB: DFI Lanparty UT 250Gb
HD: Samsung 160 Gb SATA
video card: ATI X800 Pro @ (500/1070)
ANTEC 550 power supply
Pioneer 107 DVD burner
case: Aspire Alien server case (AL)
over 27,000 on Madonion 2001 benchmark

 

[THunDA]

Im running like in sig with 1.72 vcore..

I think she will scale up with more vcore but im chicken to give it more right now..

 

[MrSeanTsontas]

My A64 754 runs stable as a rock almost for 4 months with Vcore=1.852!
Fortunatelly Gigabyte K8NS Pro overvoltages my cpu!

 

[Clevor]

XP2600-M AQYHA 0346XPMW: 2605 @ 1.75 VCORE, 217x12
XP2600-M IQYHA 0348SPMW: 2600 @ 1.65 VCORE, 236x11

The latter one does 2500 @ 1.585 actual!

Cooling is Corsair HC200. Boards are NF7-S Rev. 2.0 and 8RDA3+ Rev. 3.2(236 fsb one!). The first chip will probably need less VCORE on the Epox board.

I got these two Mobiles when they first came out from Newegg almost a year ago, and did not test them till now. Haven't tested their max yet.

 

[Grov]

Below 1.75.

At 1.55 + 104%

God knows why the DFI has this stupid option.

 

[HardwareHank]

1.80. That's as far as this damn K7N2 Delta-L goes. I need to volt mod.