What's your voltage? [retired sticky]

[TheSocKs]

Athlon xp-m 2500+ @ 2.7ghz runnin 1.75 volts

 

[SideShowHaze]

XP-M2600 @2.5ghz runnin 1.85v (11.5*218)
XP-M2500 @2.5ghz runnin 1.775v (12.5*200)

 

[roadhead]

XP Mobile 2600+ at 12.5 * 200 Currently at 1.8 volts even.

 

[N3buchan3zzar]

1.8 if its cold enough can run 11*240 stable...that's if I vent some nice cold SD air thru my case . Normal room temps take 1.85 to do the same but I usually just clock down to 10.5*240 at 1.8

 

[lenzo]

2600M/NF7-S v2

1.875v (prime95) & 1.90v (mem86) for 2.6 ghz with 5500rpm Volcano. [email protected] timings on 2x256 PDP PC3200 (rated 2-2-2-5).
2600m 216*12. CPU drawing 148 watts of juice and temps soaring to 47-49C full load. Previously 200*[email protected] at 40-42C full load.
DDR2 at PC3700 needed, watercooling needed, and new OCZ psu on order.
Signature/profile shows earlier configuration at lower voltage.

 

[lenzo]

2600M/NF7-S v2

1.875v (prime95) & 1.9v (mem86) for 2.6 ghz with 5500rpm Volcano. [email protected] timings on 2x256 PDP PC3200 (rated 2-2-2-5).
2600m 216*12. CPU drawing 148 watts of juice and temps soaring to 47-49C full load. Previously 200*[email protected] at 40-42C full load.
DDR2 at PC3700 needed, watercooling needed, and new OCZ psu on order.

 

[pUr33v1L]

A64 Winnie 3200+ @ 2565 Ghz- 1.712 V

 

[Bugalaman]

A64 Winnie 3200+ @ 2565 Ghz- 1.712 V

lol

 

[Careface]

AXP 2000+ (TBred B) @ 2200mhz (200*11) @ 1.75V.. its a shame the ga-7n400pro2 only allows a +10% increase in VCore =\

 

[Order66]

Well I have a 2.6mhz P4HT FSB 800 The CPU-Z program says the voltage is 3.120v with Multipler of 13. Is this good? Can I OC this?

 

[jcw122]

lol talk about old polls

 

[Dead__Man]

10.5x200 at 1.55v

it's a good athlon, dlt3c and xxxxxxx280001

yep, rated for 2.25ghz on 1.6v and is also the first cpu from a batch.....so sad my DIY watercoolig project ain't done yet, otherwise, she'd be up and kicking at maybe 2.6ghz

 

[MrSeanKon]

A64 3200+ 754 socket Vcore=1.744 (I use multimeter).

 

[noboundaries]

my athlon xp 2400 with a 15x multiplier and 133fsb runs under 1.75 vcore

 

[infinitevalence]

I think its darn close to time to kill this poll as most new AMD's run well under the lowest option on the poll. Maybe time for a new one....

 

[trickson]

I have mine at 1.7 that is the max that my mobo will go. wished it would go higher .

 

[007]

AMD XP 2600 Barton FSB = 200 CPU Clock = 2300.1 / x11.5 Voltage = 1.645V

007

 

[TranceBear]

Enough to run a small city.

 

[Silmatharien]

AMD Athlon XP-M 2500+ (Barton) - 2.3 GHz (11.5 x 200) @ 1.75V.

 

[gofra]

AMD Athlon XP-M 2500+ (Barton) - 2.3+ GHz ATM (185 x 12,5) @ 1.618 V