- Joined
- Jan 13, 2005
ok a long term goal of mine is to get my 2400+ running truly at 2.4Ghz with atleast a 400FSB....well....i can get a 440FSB but i cant get 2.4Ghz and finally today i got windows to give me the reason why...
i tryed it again with my comp running 220x11 w/ 1.975V posts fine temps in the low 40's after being run all day at 220x10.5 (~2.3Ghz) at the same voltage and i come to windows....first boot doesent work, blakc screen, reset hit f8 and i get the menu for windows and try the old las known good config trick and it pop up something about an issue that ACPI.sys may be missing/corrupt how do i fix this?
i the voltage is plenty, the com runs fine at 220x10.5 with 1.800V...so i am assuming its a windows issue
i tryed it again with my comp running 220x11 w/ 1.975V posts fine temps in the low 40's after being run all day at 220x10.5 (~2.3Ghz) at the same voltage and i come to windows....first boot doesent work, blakc screen, reset hit f8 and i get the menu for windows and try the old las known good config trick and it pop up something about an issue that ACPI.sys may be missing/corrupt how do i fix this?
i the voltage is plenty, the com runs fine at 220x10.5 with 1.800V...so i am assuming its a windows issue