Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
eVGA/XFX 780i BIOS Settings (P03)
Advance Chipset Features
System Clocks
** Frequency Setting **
CPU Multiplier - x9
PCIe x16_3, MHz - 120
SSP<->MCP Ref Clock, MHZ - 250.0
** HT Multiplier **
nforce SPP --> nForce MCP 4 x
nforce SPP <-- nForce MCP 4 x
** Spread Spectrun Setting **
x CPU Spread Spectrun - Disabled
x HT Spread Spectrun - Disabled
x PCIe Spread Spectrun(MCP) - Disabled
x SATA Spread Spectrun - Disabled
FSB & Memory Config
FSB - Memory Clock Mode - Unlinked
x FSB - Memory Ratio - Auto
FSB (QDR), MHz - 1700
MEM (DDR), MHz - 907
Memory Timing Setting
Memory Timing Setting - Expert
tCL (CAS Latency) - 4
tRCD - 3
tRO - 3
tRAS - 8
Command Per Clock (CMD) - 2T
** Advance Memory Settings **
tRRD - Auto(4) (4)
tRC - Auto(26) (26)
tWR - Auto(6) (6)
tWTR - Auto(10) (9)
tREF - Auto (7.8uS)
CPU Configuration
Limit CPUID MaxVal - Disabled
Intel SpeedStep - Disabled
PPM Mode - Native Mode
CPU Thermal Control - Disabled
C1E Enhanced Halt State - Disabled
Excute Disable Bit - Disabled
Virtualization Technology - Disabled
CPU Core 0 - Enabled
CPU Core 1 - Enabled
CPU Core 2 - Enabled
CPU Core 3 - Enabled
System Voltages
CPU Core - 1.60000 (1.52v)
CPU FSB - Auto (1.4v)
Memory - 2.200v ( 2.200v)
nForce SPP - Auto (1.40v)
nForce MCP - Auto (1.500v)
GTLVREF Lane 0 - Auto (+00mv)
GTLVREF Lane 1 - Auto (+95mv)
GTLVREF Lane 2 - Auto (+00mv)
GTLVREF Lane 3 - Auto (+00mv)
HPET Function - Disabled
Intergrated Peripherials
RAID Config
RAID Enabled
SATA 1 (A0) RAID - Enabled
SATA 2 (A1) RAID - Enabled
SATA 3 (B0) RAID - Enabled
SATA 4 (C1) RAID - Enabled
SATA 5 (B1) RAID - Disabled
SATA 6 (C0) RAID - Disabled
IEEE1394 controller - Disabled
HD Audio - Disabled
IDE HDD Block Mode - Enabled
Onboard FDC Controller - Enabled
Onboard Serial Port 1 - Disabled
PnP/PCI Configurations
Init Display First - PCIEx
Reset Configuration - Disabled
Resources Controlled By - Auto(ESCD)
PCI/VGA Palette Snoop - Disabled
PCI Latency Timer(CLK) - 32
** PCI Express relative items **
Maximum Payload Size - 4096
eVGA/XFX 780i BIOS Settings (P03)
Advance Chipset Features
System Clocks
** Frequency Setting **
CPU Multiplier - x10
PCIe x16_3, MHz - 100
SSP<->MCP Ref Clock, MHZ - 200.0
** HT Multiplier **
nforce SPP --> nForce MCP 4 x
nforce SPP <-- nForce MCP 4 x
** Spread Spectrun Setting **
x CPU Spread Spectrun - Disabled
x HT Spread Spectrun - Disabled
x PCIe Spread Spectrun(MCP) - Disabled
x SATA Spread Spectrun - Disabled
FSB & Memory Config
FSB - Memory Clock Mode - Linked
x FSB - Memory Ratio - Synced
FSB (QDR), MHz - 1400
MEM (DDR), MHz - 700
Memory Timing Setting
Memory Timing Setting - Expert
tCL (CAS Latency) - 5
tRCD - 6
tRO - 6
tRAS - 18
Command Per Clock (CMD) - 2T
** Advance Memory Settings **
tRRD - Auto(4) (4)
tRC - Auto(26) (26)
tWR - Auto(6) (6)
tWTR - Auto(10) (9)
tREF - Auto (7.8uS)
CPU Configuration
Limit CPUID MaxVal - Disabled
Intel SpeedStep - Disabled
PPM Mode - Native Mode
CPU Thermal Control - Disabled
C1E Enhanced Halt State - Disabled
Excute Disable Bit - Disabled
Virtualization Technology - Disabled
CPU Core 0 - Enabled
CPU Core 1 - Enabled
CPU Core 2 - Enabled
CPU Core 3 - Enabled
System Voltages
CPU Core - 1.4375 (1.36v)
CPU FSB - 1.3v
Memory - 1.800v
nForce SPP - 1.35v
nForce MCP - 1.2v
GTLVREF Lane 0 - Auto (+00mv)
GTLVREF Lane 1 - Auto (+95mv)
GTLVREF Lane 2 - Auto (+00mv)
GTLVREF Lane 3 - Auto (+00mv)
HPET Function - Disabled
Intergrated Peripherials
RAID Config
RAID Enabled
SATA 1 (A0) RAID - Disabled
SATA 2 (A1) RAID - Disabled
SATA 3 (B0) RAID - Disabled
SATA 4 (C1) RAID - Disabled
SATA 5 (B1) RAID - Disabled
SATA 6 (C0) RAID - Disabled
IEEE1394 controller - Disabled
HD Audio - Disabled
IDE HDD Block Mode - Enabled
Onboard FDC Controller - Enabled
Onboard Serial Port 1 - Disabled
PnP/PCI Configurations
Init Display First - PCIEx
Reset Configuration - Disabled
Resources Controlled By - Auto(ESCD)
PCI/VGA Palette Snoop - Disabled
PCI Latency Timer(CLK) - 32
** PCI Express relative items **
Maximum Payload Size - 4096