• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

finanly took the dive :D

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

shortbus_

Member
Joined
Nov 21, 2003
Location
CT
just ordered a 2.4c from zipzoomfly.com :eek:

i hope they still have the m0 stepping :mad:

wish me luck ( december 8 ) :cool:

still havent decided what ram i want :(

if you have an m0 running at >290fsb please post your ram brand/speed/timings/voltage

thanks in advance for any help :)
 

stan03

Member
Joined
Mar 30, 2003
you want to see if you can get your hands on some BH5 ram, check the stick in the memory section
 

reverse

Member
Joined
Nov 26, 2003
I'll let you know how my Mushkin works out once I get everything going.

Good luck w/ yours! :D
 

batboy

Senior Moment
Joined
Jan 12, 2001
Location
Kansas, USA
shortbus_ said:
if you have an m0 running at >290fsb please post your ram brand/speed/timings/voltage

I can run my Kingston HyperX PC3000 at 283 FSB using the 5:4 ratio with 2,3,2,5 timings and 2.7v. Above that I have to use the 3:2 ratio (same timing and voltage). I suspect if I had higher vmem settings available (max of 2.8v with the IC7) I might be able to go higher with the 5:4 ratio.
 
OP
shortbus_

shortbus_

Member
Joined
Nov 21, 2003
Location
CT
i was planning on getting the mushkin lvl2 pc3500.. how fast do you think i can push it with only 2.8vdimm? if worse comes to worse ill just get my brother to help me with the vdimm mod for the ic7 :<