Well if you pump has suction cups yes, for the rad either screws or zip ties. As for the res well thats really up to you. I've had a 4x4x4 junction box as a res in my case and now I have a 5" long 2"PVC as a res thats on the outside.
Well without some pics it is hard to say but it sounds like you are on the right track. I have never used suction cups to mount my pumps but I would say keep an eye on them to make sure they don't come loose and let your pump move around.
The core should be fine with screws. I usually just use long zip ties but your setup could be even better. The res depending on your setup most likely will need a cover jsut to keep the crud from floating in there and going into your w/c system.
Most important: Make sure to leak test for at least a day. Have fun!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.