• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Mulitple radeon 9250 video cards in AccerPower s285

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

kabu3

New Member
Joined
Sep 9, 2013
Hello all,
I have AccerPower s285 computerwith 2GB of RAM, 80GB drive, 650 W kingwin, running ubuntu 9.04.I understand it's an old box but this will be fine as long I can get that to work with ubuntu 9.04. I want to put couple of graphic cards into it for multiple displays and I have few problems. I hope I can find some suggestions or answers to my problems here.
This mobo has 3 PCI slots so I thought that maybe I can add 2 older cards (with dual outputs - vga and hdmi): Radeon 9250 but for some reason things are not working as I thought they would be.
Second graphic card is detected but I can't get the screen to work, no image, nothing.
Here's my lspci output:

Code:
00:09.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
	Subsystem: Hightech Information System Ltd. Device 2020
	Flags: bus master, VGA palette snoop, medium devsel, latency 32, IRQ 17
	Memory at a8000000 (32-bit, prefetchable) [size=128M]
	I/O ports at bc00 [size=256]
	Memory at c9100000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at c8000000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel modules: radeonfb

00:09.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
	Subsystem: Hightech Information System Ltd. Device 2021
	Flags: medium devsel
	Memory at b0000000 (32-bit, prefetchable) [disabled] [size=128M]
	Memory at c9120000 (32-bit, non-prefetchable) [disabled] [size=64K]
	Capabilities: <access denied>

00:0b.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
	Subsystem: Hightech Information System Ltd. Device 2020
	Flags: bus master, medium devsel, latency 32, IRQ 19
	Memory at b8000000 (32-bit, prefetchable) [size=128M]
	I/O ports at c000 [size=256]
	Memory at c9110000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at c8020000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel modules: radeonfb

00:0b.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
	Subsystem: Hightech Information System Ltd. Device 2021
	Flags: medium devsel
	Memory at c0000000 (32-bit, prefetchable) [disabled] [size=128M]
	Memory at c9130000 (32-bit, non-prefetchable) [disabled] [size=64K]
	Capabilities: <access denied>


I think the problem is that the second device has letter in BusID - 00:0b.0 and in xorg.conf you can add only letters.
Here's my xorg.conf:
Code:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier	"Main"
	Screen		0 "Primary"
	Screen		3 "SonyRight"
#	Screen		3 "SonyRight"
#	Screen		3 "SonyRight" RightOf "Primary"
	Option		"Xinerama" "off"
	Option		"Clone" "off"
EndSection


############
## Card 1 ##
############
Section "Device"
	Identifier	"card1vga"
	BoardName	"ATI Radeon 9250 rev01"
	BusID		"PCI:0:9:0"
	Driver		"radeon"
	Option		"EnablePageFlip" "true"
	Screen		0
	Option		"UseDisplayDevice" "DFP-0"
	Option		"DynamicTwinView" "FALSE"
EndSection

Section "Device"
	Identifier	"card1hdmi"
	BoardName	"ATI Radeon 9250 rev01"
	BusID		"PCI:0:9:1
	Driver		"radeon"
	Option		"EnablePageFlip" "true"
	Screen		1
	Option		"UseDisplayDevice" "DFP-0"
	Option		"DynamicTwinView" "FALSE"
EndSection

##################
# Integrated vga #
##################
Section "Device"
	Identifier	"vgaIntegrated"
	BoardName	"SiS 661/741/760 PCI/AGP "
	BusID		"PCI:1:0:0"
	Screen		2
EndSection

############
# Card 2 ##
###########
Section "Device"
	Identifier	"card2vga"
	BoardName	"ATI Radeon 9250 rev01
	BusID		"00:0b:0"
	Driver		"radeon"
	Option		"EnablePageFlip" "true"
	Screen		3
	Option		"UseDisplayDevice" "DFP-0"
	Option		"DynamicTwinView" "FALSE"
EndSection

Section "Device"
	Identifier	"card1hdmi"
	BoardName	"ATI Radeon 9250 rev01"
	BusID		"PCI:0:0b:1
	Driver		"radeon"
	Option		"EnablePageFlip" "true"
	Screen		4
	Option		"UseDisplayDevice" "DFP-0"
	Option		"DynamicTwinView" "FALSE"
EndSection

Section "Monitor"
	Identifier	"LG"
EndSection

Section "Monitor"
	identifier	"Sony"
EndSection

Section "Screen"
	Identifier	"Primary"
	Monitor		"LG"
	Device		"card1vga"
	DefaultDepth	24
EndSection

Section "Screen"
	Identifier	"SonyRight"
	Monitor		"Sony"
	Device		"card2vga"
	DefaultDepth	24
EndSection

Maybe there's another way of working out this issue? Any ideas?
Any help appreciated.
Thanks
 

petteyg359

Likes Popcorn
Joined
Jul 31, 2004
Post your Xorg.0.log file (in /var/log or somewhere similar, not sure for Ubuntu), too.

If that's an exact paste, you're missing a closing quote on BoardName for card2vga, and on BusID for the second card1hdmi (which should probably be card2hdmi). On the "real" card1hdmi, it is also missing the closing quote for BusID.
 
OP
K

kabu3

New Member
Joined
Sep 9, 2013
Thanks for looking at my post.
Here's my updated xorg.conf file:

Code:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier	"Layout0"
	Screen		0 "Screen0"
	Screen		3 "Screen3" LeftOf "Screen0"
	Option		"Xinerama" "off"
	Option		"Clone" "off"
EndSection


############
## Card 1 ##
############
Section "Device"
	Identifier	"card1vga"
	BoardName	"ATI Radeon 9250 rev01"
	BusID		"PCI:00:9:0"
	Driver		"radeon"
	Option		"EnablePageFlip" "true"
	Screen		0
	#Option		"UseDisplayDevice" "DFP-0"
	#Option		"DynamicTwinView" "FALSE"
EndSection

Section "Device"
	Identifier	"card1hdmi"
	BoardName	"ATI Radeon 9250 rev01"
	BusID		"PCI:00:9:1"
	Driver		"radeon"
	Option		"EnablePageFlip" "true"
	Screen		1
	#Option		"UseDisplayDevice" "DFP-0"
	#Option		"DynamicTwinView" "FALSE"
EndSection

##################
# Integrated vga #
##################
Section "Device"
	Identifier	"vgaIntegrated"
	BoardName	"SiS 661/741/760 PCI/AGP "
	BusID		"PCI:01:0:0"
	Screen		2
EndSection

############
# Card 2 ##
###########
Section "Device"
	Identifier	"card2vga"
	BoardName	"ATI Radeon 9250 rev01
	BusID		"PCI:00:0b:0"
	Driver		"radeon"
	Option		"EnablePageFlip" "true"
	Screen		3
	#Option		"UseDisplayDevice" "DFP-0"
	#Option		"DynamicTwinView" "FALSE"
EndSection

Section "Device"
        Identifier      "card2hdmi"
        BoardName       "ATI Radeon 9250 rev01"
        BusID           "PCI:00:0b:1"
        Driver          "radeon"
        Option          "EnablePageFlip" "true"
        Screen         4 
        #Option          "UseDisplayDevice" "DFP-0"
        #Option          "DynamicTwinView" "FALSE"
EndSection



Section "Monitor"
	Identifier	"Monitor0"
EndSection

Section "Monitor"
	Identifier "Monitor3"
EndSection

Section "Screen"
	Identifier	"Screen0"
	Monitor		"Monitor0"
	Device		"card1vga"
EndSection

Section "Screen"
	Identifier	"Screen3"
	Device		"card2vga
	#Monitor		"Monitor3"
	Monitor		"Monitor0"
EndSection

Here's the Xorg.0.log:

Code:
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux uzo 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 i686
Build Date: 09 April 2009  02:10:02AM
xorg-server 2:1.6.0-0ubuntu14 ([email protected]) 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep  9 23:24:38 2013
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "card1vga"
(**) |-->Screen "Screen3" (3)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "card2vga"
(**) Option "Xinerama" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*([email protected]:9:0) ATI Technologies Inc RV280 [Radeon 9200 PRO] rev 1, Mem @ 0xa8000000/134217728, 0xc9100000/65536, I/O @ 0x0000bc00/256, BIOS @ 0x????????/131072
(--) PCI: ([email protected]:11:0) ATI Technologies Inc RV280 [Radeon 9200 PRO] rev 1, Mem @ 0xb8000000/134217728, 0xc9110000/65536, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
(--) PCI: ([email protected]:0:0) Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter rev 0, Mem @ 0xa0000000/134217728, 0xc9000000/131072, I/O @ 0x00009000/128
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 6.12.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
	ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
	ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
	ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
	ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
	ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
	ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
	ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
	ATI Mobility RADEON M98, ATI FirePro M7750, ATI M98, ATI M98,
	ATI M98, ATI Radeon RV730 (AGP), ATI FirePro M5750,
	ATI Radeon RV730 (AGP), ATI RV730XT [Radeon HD 4670],
	ATI RADEON E4600, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI RV610, ATI Radeon HD 2400 XT,
	ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
	ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI RV670,
	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
	ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
	ATI Mobility Radeon 4500 Series, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
	ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
	ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
	ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
	ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
	ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
	ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
	ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
	ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
	ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
	ATI Radeon HD Graphics, ATI Radeon Graphics,
	ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
	ATI Radeon Graphics
(II) Primary Device is: PCI [email protected]:09:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) RADEON(0): TOTO SAYS 00000000c9100000
(II) RADEON(0): MMIO registers at 0x00000000c9100000: size 64KB
(II) RADEON(0): PCI bus 0 card 9 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
	"Screen0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "EnablePageFlip" "true"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon 9250 5960 (AGP)" (ChipID = 0x5960)
(--) RADEON(0): Linear framebuffer at 0x00000000a8000000
(II) RADEON(0): PCI card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:00:09.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:09.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(**) RADEON(0): Page Flipping enabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=262144K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2048x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 40000, min_in_pll: 40, max_in_pll: 3000, xclk: 16600, sclk: 166.000000, mclk: 240.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=16600
(II) RADEON(0): DFP table revision: 4
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL 
(II) RADEON(0): Port0:
  XRANDR name: VGA-0
  Connector: VGA
  CRT1: INTERNAL_DAC1
  DDC reg: 0x60
(II) RADEON(0): Port1:
  XRANDR name: DVI-0
  Connector: DVI-I
  CRT2: INTERNAL_DAC2
  DFP1: INTERNAL_TMDS1
  DDC reg: 0x64
(II) RADEON(0): Port2:
  XRANDR name: S-video
  Connector: S-video
  TV1: INTERNAL_DAC2
  DDC reg: 0x0
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID vendor "SNY", prod id 8784
(II) RADEON(0): Using EDID range info for horizontal sync
(II) RADEON(0): Using EDID range info for vertical refresh
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: SNY  Model: 2250  Serial#: 16843009
(II) RADEON(0): Year: 2003  Week: 17
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 30  vert.: 23
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.631 redY: 0.347   greenX: 0.309 greenY: 0.583
(II) RADEON(0): blueX: 0.149 blueY: 0.113   whiteX: 0.283 whiteY: 0.298
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 65.0 MHz   Image Size:  304 x 228 mm
(II) RADEON(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Ranges: V min: 57 V max: 63 Hz, H min: 28 H max: 52 kHz, PixClock max 90 MHz
(II) RADEON(0): Monitor name: SDM-HS53
(II) RADEON(0): Serial No: 3237015
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff004dd9502201010101
(II) RADEON(0): 	110d01030c1e1778eab149a1584f9526
(II) RADEON(0): 	1d484ca1080001010101010101010101
(II) RADEON(0): 	01010101010164190040410026301888
(II) RADEON(0): 	360030e410000018000000fd00393f1c
(II) RADEON(0): 	3409000a202020202020000000fc0053
(II) RADEON(0): 	444d2d485335330a20202020000000ff
(II) RADEON(0): 	00333233373031350a20202020200098
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
finished output detect: 1
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): EDID vendor "SNY", prod id 8784
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: SNY  Model: 2250  Serial#: 16843009
(II) RADEON(0): Year: 2003  Week: 17
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 30  vert.: 23
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.631 redY: 0.347   greenX: 0.309 greenY: 0.583
(II) RADEON(0): blueX: 0.149 blueY: 0.113   whiteX: 0.283 whiteY: 0.298
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 65.0 MHz   Image Size:  304 x 228 mm
(II) RADEON(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Ranges: V min: 57 V max: 63 Hz, H min: 28 H max: 52 kHz, PixClock max 90 MHz
(II) RADEON(0): Monitor name: SDM-HS53
(II) RADEON(0): Serial No: 3237015
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff004dd9502201010101
(II) RADEON(0): 	110d01030c1e1778eab149a1584f9526
(II) RADEON(0): 	1d484ca1080001010101010101010101
(II) RADEON(0): 	01010101010164190040410026301888
(II) RADEON(0): 	360030e410000018000000fd00393f1c
(II) RADEON(0): 	3409000a202020202020000000fc0053
(II) RADEON(0): 	444d2d485335330a20202020000000ff
(II) RADEON(0): 	00333233373031350a20202020200098
(II) RADEON(0): EDID vendor "SNY", prod id 8784
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output VGA-0 using initial mode 1024x768
after xf86InitialConfiguration
(**) RADEON(0): Display dimensions: (300, 230) mm
(**) RADEON(0): DPI set to (86, 113)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using EXA acceleration architecture
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 2.4.0
	ABI class: X.Org Video Driver, version 5.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) RADEON(0): RADEONScreenInit a8000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() : 
(II) RADEON(0):   mem_size         : 0x10000000
(II) RADEON(0):   MC_FB_LOCATION   : 0xafffa000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 131072 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00400000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00404000
(II) RADEON(0): Will use 4096 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 4096 kb for back buffer at offset 0x00408000
(II) RADEON(0): Will use 4096 kb for depth buffer at offset 0x00808000
(II) RADEON(0): Will use 58880 kb for textures at offset 0x00c08000
(II) RADEON(0): Will use 59872 kb for X Server offscreen at offset 0x04588000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:09.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:09.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xa8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 8192 kB allocated with handle 0xf81cb000
(II) RADEON(0): [pci] ring handle = 0xf81cb000
(II) RADEON(0): [pci] Ring mapped at 0xb77d2000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf82cc000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb807c000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf82cd000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xaf531000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf84cd000
(II) RADEON(0): [pci] GART Texture map mapped at 0xaf051000
(II) RADEON(0): [drm] register handle = 0xc9100000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0xafffa000 0x1fff0000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 17
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0xafffa000 is: 0xafffa000
(WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0xffffffc0
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0xafffa000 0xafffa000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled for R200 type cards.
(II) RADEON(0): Setting EXA maxPitchBytes
(II) EXA(0): Offscreen pixmap area of 61308928 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(II)         UploadToScreen
(II)         DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 65000000
best_freq: 65000000
best_feedback_div: 130
best_ref_div: 9
best_post_div: 6
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0xafffa000 0xafffa000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:09.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:09.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/dri/r200_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 304 x 228
(II) RADEON(0): Damage tracking initialized for page flipping
(II) config/hal: Adding input device USB USB Keykoard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 2.1.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) USB USB Keykoard: always reports core events
(**) USB USB Keykoard: Device: "/dev/input/event5"
(II) USB USB Keykoard: Found 1 mouse buttons
(II) USB USB Keykoard: Found keys
(II) USB USB Keykoard: Configuring as keyboard
(**) USB USB Keykoard: YAxisMapping: buttons 4 and 5
(**) USB USB Keykoard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) USB USB Keykoard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) USB USB Keykoard: xkb_model: "pc105"
(**) Option "xkb_layout" "us"
(**) USB USB Keykoard: xkb_layout: "us"
(II) config/hal: Adding input device USB USB Keykoard
(**) USB USB Keykoard: always reports core events
(**) USB USB Keykoard: Device: "/dev/input/event4"
(II) USB USB Keykoard: Found keys
(II) USB USB Keykoard: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) USB USB Keykoard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) USB USB Keykoard: xkb_model: "pc105"
(**) Option "xkb_layout" "us"
(**) USB USB Keykoard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event3"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device PixArt USB Optical Mouse
(**) PixArt USB Optical Mouse: always reports core events
(**) PixArt USB Optical Mouse: Device: "/dev/input/event6"
(II) PixArt USB Optical Mouse: Found 8 mouse buttons
(II) PixArt USB Optical Mouse: Found x and y relative axes
(II) PixArt USB Optical Mouse: Configuring as mouse
(**) PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE)
(**) PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
(**) PixArt USB Optical Mouse: (accel) filter chain progression: 2.00
(**) PixArt USB Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) PixArt USB Optical Mouse: (accel) set acceleration profile 0
(II) RADEON(0): EDID vendor "SNY", prod id 8784
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: SNY  Model: 2250  Serial#: 16843009
(II) RADEON(0): Year: 2003  Week: 17
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 30  vert.: 23
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.631 redY: 0.347   greenX: 0.309 greenY: 0.583
(II) RADEON(0): blueX: 0.149 blueY: 0.113   whiteX: 0.283 whiteY: 0.298
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 65.0 MHz   Image Size:  304 x 228 mm
(II) RADEON(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Ranges: V min: 57 V max: 63 Hz, H min: 28 H max: 52 kHz, PixClock max 90 MHz
(II) RADEON(0): Monitor name: SDM-HS53
(II) RADEON(0): Serial No: 3237015
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff004dd9502201010101
(II) RADEON(0): 	110d01030c1e1778eab149a1584f9526
(II) RADEON(0): 	1d484ca1080001010101010101010101
(II) RADEON(0): 	01010101010164190040410026301888
(II) RADEON(0): 	360030e410000018000000fd00393f1c
(II) RADEON(0): 	3409000a202020202020000000fc0053
(II) RADEON(0): 	444d2d485335330a20202020000000ff
(II) RADEON(0): 	00333233373031350a20202020200098
(II) RADEON(0): EDID vendor "SNY", prod id 8784
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
disable primary dac
enable primary dac
disable primary dac
enable primary dac
(II) RADEON(0): EDID vendor "SNY", prod id 8784
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: SNY  Model: 2250  Serial#: 16843009
(II) RADEON(0): Year: 2003  Week: 17
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 30  vert.: 23
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.631 redY: 0.347   greenX: 0.309 greenY: 0.583
(II) RADEON(0): blueX: 0.149 blueY: 0.113   whiteX: 0.283 whiteY: 0.298
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 65.0 MHz   Image Size:  304 x 228 mm
(II) RADEON(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Ranges: V min: 57 V max: 63 Hz, H min: 28 H max: 52 kHz, PixClock max 90 MHz
(II) RADEON(0): Monitor name: SDM-HS53
(II) RADEON(0): Serial No: 3237015
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff004dd9502201010101
(II) RADEON(0): 	110d01030c1e1778eab149a1584f9526
(II) RADEON(0): 	1d484ca1080001010101010101010101
(II) RADEON(0): 	01010101010164190040410026301888
(II) RADEON(0): 	360030e410000018000000fd00393f1c
(II) RADEON(0): 	3409000a202020202020000000fc0053
(II) RADEON(0): 	444d2d485335330a20202020000000ff
(II) RADEON(0): 	00333233373031350a20202020200098
(II) RADEON(0): EDID vendor "SNY", prod id 8784
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "SNY", prod id 8784
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: SNY  Model: 2250  Serial#: 16843009
(II) RADEON(0): Year: 2003  Week: 17
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 30  vert.: 23
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.631 redY: 0.347   greenX: 0.309 greenY: 0.583
(II) RADEON(0): blueX: 0.149 blueY: 0.113   whiteX: 0.283 whiteY: 0.298
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 65.0 MHz   Image Size:  304 x 228 mm
(II) RADEON(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Ranges: V min: 57 V max: 63 Hz, H min: 28 H max: 52 kHz, PixClock max 90 MHz
(II) RADEON(0): Monitor name: SDM-HS53
(II) RADEON(0): Serial No: 3237015
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff004dd9502201010101
(II) RADEON(0): 	110d01030c1e1778eab149a1584f9526
(II) RADEON(0): 	1d484ca1080001010101010101010101
(II) RADEON(0): 	01010101010164190040410026301888
(II) RADEON(0): 	360030e410000018000000fd00393f1c
(II) RADEON(0): 	3409000a202020202020000000fc0053
(II) RADEON(0): 	444d2d485335330a20202020000000ff
(II) RADEON(0): 	00333233373031350a20202020200098
(II) RADEON(0): EDID vendor "SNY", prod id 8784
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "SNY", prod id 8784
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: SNY  Model: 2250  Serial#: 16843009
(II) RADEON(0): Year: 2003  Week: 17
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 30  vert.: 23
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.631 redY: 0.347   greenX: 0.309 greenY: 0.583
(II) RADEON(0): blueX: 0.149 blueY: 0.113   whiteX: 0.283 whiteY: 0.298
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 65.0 MHz   Image Size:  304 x 228 mm
(II) RADEON(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Ranges: V min: 57 V max: 63 Hz, H min: 28 H max: 52 kHz, PixClock max 90 MHz
(II) RADEON(0): Monitor name: SDM-HS53
(II) RADEON(0): Serial No: 3237015
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff004dd9502201010101
(II) RADEON(0): 	110d01030c1e1778eab149a1584f9526
(II) RADEON(0): 	1d484ca1080001010101010101010101
(II) RADEON(0): 	01010101010164190040410026301888
(II) RADEON(0): 	360030e410000018000000fd00393f1c
(II) RADEON(0): 	3409000a202020202020000000fc0053
(II) RADEON(0): 	444d2d485335330a20202020000000ff
(II) RADEON(0): 	00333233373031350a20202020200098
(II) RADEON(0): EDID vendor "SNY", prod id 8784
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "SNY", prod id 8784
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: SNY  Model: 2250  Serial#: 16843009
(II) RADEON(0): Year: 2003  Week: 17
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync:  Separate  Composite
(II) RADEON(0): Max Image Size [cm]: horiz.: 30  vert.: 23
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.631 redY: 0.347   greenX: 0.309 greenY: 0.583
(II) RADEON(0): blueX: 0.149 blueY: 0.113   whiteX: 0.283 whiteY: 0.298
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): [email protected]
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 65.0 MHz   Image Size:  304 x 228 mm
(II) RADEON(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(II) RADEON(0): Ranges: V min: 57 V max: 63 Hz, H min: 28 H max: 52 kHz, PixClock max 90 MHz
(II) RADEON(0): Monitor name: SDM-HS53
(II) RADEON(0): Serial No: 3237015
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff004dd9502201010101
(II) RADEON(0): 	110d01030c1e1778eab149a1584f9526
(II) RADEON(0): 	1d484ca1080001010101010101010101
(II) RADEON(0): 	01010101010164190040410026301888
(II) RADEON(0): 	360030e410000018000000fd00393f1c
(II) RADEON(0): 	3409000a202020202020000000fc0053
(II) RADEON(0): 	444d2d485335330a20202020000000ff
(II) RADEON(0): 	00333233373031350a20202020200098
(II) RADEON(0): EDID vendor "SNY", prod id 8784
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0

Thanks again for any tips that will make that work.
 

petteyg359

Likes Popcorn
Joined
Jul 31, 2004
You're still missing the closing quote on card2vga's BoardName, though it's not causing any errors. Any reason you have them both pointing at the same monitor entry?

Have you tried running without an xorg.conf? Just move it to xorg.conf.bak or something, and start up X, and see what it auto-detects.