My Current CPU speed (in Ghz) is:

[freeagent]

2600 tbred b 178x13.5=2405 @ 1.85 37 idle 45 prime

 

[StatikLullaBy]

xp 2500+ at 2205 mhz.. runs okay for now..havent really seen any temp increases so i think my sensors are prolly gimped or something, but, it'll shut off if it needs to

 

[deathman20]

Won't post mine yet, still sitting at stock since sometime early may. Waiting for some ram I got on order. But sitting at 1.9Ghz range right now Hopfully we'll change that up to 2.2-2.3 Ghz with little tweaking.

 

[Duke3d87]

Mobile AthlonXP 2600+ @ 2.74 GHz (12.5X219) at 1.93 volts, watercooled currently at 113 degrees F while folding. Do you think that the 1.93 volts its way too much for the processor?

 

[the adam]

2.0 ghz winchester (can't overclock till I get my case modded )

 

[Sjaak]

Speaking for my server, 1800+ @ 2.32Ghz (11.5*202)

 

[YviE]

Mobile AthlonXP 2600+ @ 2.74 GHz (12.5X219) at 1.93 volts, watercooled currently at 113 degrees F while folding. Do you think that the 1.93 volts its way too much for the processor?

I don't think 1.93v is too much, since you're watercooling the chip and it doesn't exceed 113°F.

YviE

 

[Duke3d87]

ok thanks! its also 9 degrees outside my house and really cold in here! I've got 6 80mm fans running at 7 volts and dual rads...it was lower before, but i'm not complaining (now its 106)

 

[MonroeM]

2.8 is the highest on the poll? Are you kidding?

... err... wait, this is the AMD CPU section isn't it?

My bad... *backs out slowly*

*reminds self to look where a thread is located before clicking, after searching the latest posts*

 

[Sjaak]

2.8 is the highest on the poll? Are you kidding?

... err... wait, this is the AMD CPU section isn't it?

My bad... *backs out slowly*

*reminds self to look where a thread is located before clicking, after searching the latest posts*

LOL i had exactly the same (2.8? thats my stock speed) but then i read proper and filled out my server rig instead.

 

[mudpark41]

2.4 ghz
XP-M @ 240 x 10

 

[Crana]

2105MHz was @ 1997 until i raised the FSB to 140 from 133 with out raising the voltage or anything

 

[Aphex_Tom_9]

now operating at 2775mhz, hopefully i'll break 2.8ghz soon.

 

[johnmcc516]

I just updated and increased my oc. Its at 2.52 GHz now. w00t!
!

 

[mysterfix]

Curently at 2.6ghz

Edit: That was 2 chips ago, I'm now running at 2.74ghz

 

[Spion]

i'm at 2.44GHz with my 2500+. takes 1.9v to get it stable tho. good thing is that my full load temp is 38c

 

[Ha_hA_HA!]

Barton 3200+ @ 2427MHz on air.

 

[ManOman]

Running at a consistantly stable 1.606ghz on my TBird 1.4

 

[Avg]

I moved up a notch, since my NF7 died I decided to try it's cpu on my NF7-s and to my surprise even though it used the same amount of voltage at 2.5ghz as the other cpu it was able to clock about 50mhz higher getting me to 2.65ghz at 1.88v.

 

[Gregory_WE]

Running stock 2.2GHz right now.