I'm planning on upgrading to an athlon64 motherboard/proc/memory setup soon. Right now I'm running an Abit KR7A-RAID kt233a board, 1.4ghz thunderbird, and 512mb of crucial ram set at 2-5-2. What I'm planning on getting is an Asus A8V Deluxe board, an Athlon64 3200+ C0 Clawhammer DTR chip, and 1gb of OCZ EB PC-3700 ddr ram. My only concern is my current power supply. It's an Enermax EG465P-VE(FCA) psu, rated at 460watts (I think). Right now at idle, the rail voltages are reading +3.3 = 3.46V, +5 = 4.84V, +12 = 11.98V. Do those readings look good enough? I'm thinknig the +5 is a little low, so I'm not sure if it'll be adequate for an athlon64 system or not. What are your thoughts?
edit: just fyi, i'll be getting an slk-948u for cooling.
edit: i also forgot, it's kt266a, not kt233a.
edit: just fyi, i'll be getting an slk-948u for cooling.
edit: i also forgot, it's kt266a, not kt233a.
Last edited: