SetFSB
SetFSB is FREEWARE.
Use SetFSB.EXE at YOUR OWN RISK.
SetFSB(s) can be downloaded from here.
Japanese(latest)
http://www.page.sannet.ne.jp/k-hazama/setfsb/setfsb.htm
English(latest)
http://www.page.sannet.ne.jp/k-hazama/setfsb/info.htm
Notes
1.GIVEIO.SYS
IF you use SetFSB by WindowsNT4/2000/XP,
You must put "GIVEIO.SYS" in your SetFSB dir.
GIVEIO can be received from here.
http://www.ddj.com/ftp/1996/1996.05/directio.zip
2.Command Line options
-w[00-99] : Wait [sec] default=10sec
-s[000-999] : Set FSB [MHz]
-m[0-9] : Mode 0=normal(default) , 1=ultra
-i[00-99] : Increment [MHz] default=max
-a[0-1] : ASUS�@0=none , 1=ASUS
I have a shortcut in my startup folder that looks like the following:
Example : Wait=5sec, Mode=(0:default), Set FSB=150MHz, Increment=5MHz
"C:\Program Files\setfsbU14e_8iexp\SetFSBu_8IEXP.exe" -w05 -s150 -i05
3.The PCI speed of "SetFSB for GA-8IEXP"
The datasheet of P4PE's clockgen(ICS950224AF) is not exhibited to the site of ICS yet.
SetFSB can be setting FSB even if there is no data sheet,
but it can not understand PCI divider (especially Fix Rate).
This problem will be corrected when the datasheet is exhibited.
I think that PCI of bios is right.
Thanks-abo333