I got an update, right now my situation is as follows:
I did the recovery BIOS trick again. For me the trick works different. I got no seperated power switch on the back. I pull my power cabel and then hold my power button after some seconds I put the cable in again, keep holding the button and then it starts but shuts down almost instantly, after 2-3 seconds. After that it does stay off. Then I wait some seconds and hit my power button and then it tries to boot but goes off after 3,4 seconds and then again but after maximal 3-4 times of automatically powering on and off I get the recovery screen. Just another possible method that you might wanna add to the guide if somebody has no seperate power switch on the backside of his/her PC.
Anyway my current situation is that my PC is actually booting after shutting off. The thing is after recovery I checked my BIOS Version and even got the newest BETA one F14 from Gigabyte H77M-D3H rev. 1.1. , olthough I never installed the new one. Anyway after recovery I went to BIOS and left it "without saving", got to windows shut my PC off. After that when hitting the power button it actually boots but now I always get to the BIOS screen that asks me: Load defaults and then boot/Load defaults and then reboot/ Enter BIOS. I have hit "enter BIOS2 the last two times and left BIOS without saving and got to Windows. Now I am kind of afraid and don't know what to pick or if I actually should pick any of the other two options. I picked loading defaults and then boot two months ago when I already had struggled with that problem and then I got back into the loop where I do not wanna end up again. Maybe somebody can tell me what to pick and maybe knows also the reason why even after recovering my BIOS has its flaws. Apparently it is working right now, at least the last two times I shut my PC off, but I am not quiet optimistic that it will work tomorrow evening
I did the recovery BIOS trick again. For me the trick works different. I got no seperated power switch on the back. I pull my power cabel and then hold my power button after some seconds I put the cable in again, keep holding the button and then it starts but shuts down almost instantly, after 2-3 seconds. After that it does stay off. Then I wait some seconds and hit my power button and then it tries to boot but goes off after 3,4 seconds and then again but after maximal 3-4 times of automatically powering on and off I get the recovery screen. Just another possible method that you might wanna add to the guide if somebody has no seperate power switch on the backside of his/her PC.
Anyway my current situation is that my PC is actually booting after shutting off. The thing is after recovery I checked my BIOS Version and even got the newest BETA one F14 from Gigabyte H77M-D3H rev. 1.1. , olthough I never installed the new one. Anyway after recovery I went to BIOS and left it "without saving", got to windows shut my PC off. After that when hitting the power button it actually boots but now I always get to the BIOS screen that asks me: Load defaults and then boot/Load defaults and then reboot/ Enter BIOS. I have hit "enter BIOS2 the last two times and left BIOS without saving and got to Windows. Now I am kind of afraid and don't know what to pick or if I actually should pick any of the other two options. I picked loading defaults and then boot two months ago when I already had struggled with that problem and then I got back into the loop where I do not wanna end up again. Maybe somebody can tell me what to pick and maybe knows also the reason why even after recovering my BIOS has its flaws. Apparently it is working right now, at least the last two times I shut my PC off, but I am not quiet optimistic that it will work tomorrow evening