0310 vs 0319 1700+

Brunt · Jul 23, 2003

0310 vs 0319 1700+ -- 0319 out of stock

Alright, I ordered the 0310 for $68 after shipping. I found a 0319 For under $70 also. (It is out of stock

)

I will order the 0319 tomorrow if it is really that much better, and just keep the 0310 or sell it to my friend. (blah blah I am full of it lol)

Is it worth getting now?

I have the SLK-800(first edition), and a 160cfm blower

How much better would the 0319 do over the 0310??

Same stepping besides the week

v8vega350 · Jul 23, 2003

my 0319 beat my 0310 to deth but i didnt have a good experience with mine but alot of people had much better experience with there 0310's then me. but these 0319's seem to draw a lot of current

Brunt · Jul 23, 2003

Ahh well, I was mistaken...that site was also out of stock of the 0319....Well, if I find one, I will buy it anyway, and compare my results

Jarhead7236 · Jul 23, 2003

i've read good results w/0310 chips...you should be good to go with that chip....

Polar2 · Jul 23, 2003

I got one of the good 0319. With my old m/b Epox kt333 8k5a2+, gf3 card I o/c to 2400=192x12.5 @ 1.775v. Video card holding back. Then purchased an Upgradeware cpu multiplier adapter and changed to 14x182=2548 at 1.825v. On air with slk800 and 52cfm fan. Corsair xms pc3200 at turbo 2-2-2-5 @2.8v.

cack01 · Jul 23, 2003

I love my 310. I can run 2.2 Ghz with 1.55 volts. It lets me keep my fan noise down, and its still plenty fast.

LilBuddy · Jul 23, 2003

my 319 does 210x11.5 at 1.65 volts. pretty good chip if you ask me, just need a new PSU to get higher

snvpa · Jul 23, 2003

no complaints with my 310 200* 12.5 on nf7-s v.1.2. never crashes never freezes. runs 24/7 1.95 volts on moderate air cooling slk-700 load in upper 40's idle in mid 30's

hitechjb1 · Jul 23, 2003

My Tbred B 1700+ DLT3C 0310 XPMW can run 2.6 GHz prime95 stable with a SLK-800U and a Vantec Tornado at full speed for benchmarking.

Normally I run it in the low to mid 2.5 GHz using a TT SF II at around 1.925 V.

Milkman · Jul 23, 2003

14x175 here with my 0310 and 1.8 volts, I love this chip, I have had it to 2560 with 1.85v.

Brunt · Jul 23, 2003

Awesome, thanks

I expect good overclocks from this chip..I am gonna burn it in for a week before I even try to overclock it!

I also need to resand the heatsink and mount my blower..right now its just kinda blowing on the hs, I need to route it so its blowing directly on the hs, and only the hs!!

Banyan · Jul 23, 2003

snvpa said:
no complaints with my 310 200* 12.5 on nf7-s v.1.2. never crashes never freezes. runs 24/7 1.95 volts on moderate air cooling slk-700 load in upper 40's idle in mid 30's

hey, what bios rev are you using atm on that 1.2 board?

Emericana · Jul 23, 2003

i could get 2300 w/ 1.8v w/ the 0310 i can get 2400 w/ 1.775 v w/ the 0319

runnin currently the 0319 great chip

G|-|oST · Jul 23, 2003

0310 WPMW @ 12 x 200 = 2400 at 1.7 Volts here

can't go wrong with either one.

Mr. Fri · Jul 24, 2003

Any idea where I could get a reliable Tbred B 1700+ DLT3C 319?

SVC had them and are now out of stock. I e-mailed them and they said they would have more Tbred B DLT3C 1700+ but might have a hard time getting week 319. Any other suggestions?

I'd be interested in either American or German websites.

0310 vs 0319 1700+

Brunt

Member

v8vega350

Member

Brunt

Member

Jarhead7236

Member

Polar2

Registered

cack01

Member

LilBuddy

Member

snvpa

Member

hitechjb1

Senior Member

Milkman

Member

Brunt

Member

Banyan

Member

Emericana

Member

G|-|oST

Member

Mr. Fri

Member

Similar threads