- Joined
- Jan 5, 2005
- Location
- New Mexico
Ugg.
FX-55 @ stock, 1.4v
Mushkin 2x1gb HP Blue DDR3200 (Infineon BE-5), 2-3-2-6 stock, 1T, 2.8v placed in the orange slots with all other timings set at very known stable rates
mobo chipset @ stock, 1.7v with every unused accessory disabled in bios - the last bios DFI released for the board
-----
ram has done 8 hours of memtest86+ test #5, zero errors
caps around 240 @ 2.5-3-3-8 with these volts
mobo easily runs 250+ fsb in prime95
cpu will boot into windows @ 13x235 with 1.45v and does run prime95 for 20-30 minutes at that setting
With all speeds at stock prime95 fails in under 1 minute. Whats going on!!!! Even though ram seems fine in memtest I have a feeling that it is the reason for prime95 failing, what can I do?
Help me hit 3ghz!
FX-55 @ stock, 1.4v
Mushkin 2x1gb HP Blue DDR3200 (Infineon BE-5), 2-3-2-6 stock, 1T, 2.8v placed in the orange slots with all other timings set at very known stable rates
mobo chipset @ stock, 1.7v with every unused accessory disabled in bios - the last bios DFI released for the board
-----
ram has done 8 hours of memtest86+ test #5, zero errors
caps around 240 @ 2.5-3-3-8 with these volts
mobo easily runs 250+ fsb in prime95
cpu will boot into windows @ 13x235 with 1.45v and does run prime95 for 20-30 minutes at that setting
With all speeds at stock prime95 fails in under 1 minute. Whats going on!!!! Even though ram seems fine in memtest I have a feeling that it is the reason for prime95 failing, what can I do?
Help me hit 3ghz!
Last edited: