Fittings issue

[Thick8]

Hi guys. I finally received the lst of the parts to finish my build. I ordered MOSFET, NB, and SB blocks from Anfi-tec because they are the only company that makes blocks for my board. Unfortunately the Monsoon fittings are too large a diameter to fit the NB and SB blocks. The center to center measurement between the holes is .710". does anyone know of fittings that will fit? Can I use barb fittings for hard tubing. I really don't want to use hose as it will mess up the look.
Thanks,
John

 

[Thick8]

I guess I could do 2 double 45deg rotating fittings per block. that should work.

 

[GTXJackBauer]

Are you saying the threads on the blocks aren't the standard G 1/4?

Never heard of that company.

 

[Thick8]

they are G1/4 but the compression fittings need holes that are separated by at least 1" center to center. The holes in these blocks are a little less than 3/4" apart center to center. I went ahead and ordered 4 double 45 deg. male/female fittings. They will go in the blocks and the compression fittings will attach to them.
Darn, 3 more days waiting for parts.