How Fast is Your 1700+ Tbred-B?

[{PMS}fishy]

Please Indicate Stable Over Clock Achieved (1700+ B Steppings ONLY)

Please also indicate your full stepping, as well the v-core used to achive this O/C.

Also no thread crapping. I only want to see data listed in the posts. There are other places that you can post, "WOW nice O/C dude" but this post is not that place. Keep the thread craps for someplace else.

Thanks

 

[zindane18]

RIght now Im stable at 2444, trying for 2500 with Air cooling
SLK800 with vantec tornado, idle temps 38.5c load 42c
My steppings as follows,

DLT3C "X"PMW 0310 voltage at 2.825v

Zindane

 

[coldfusion71]

the max i can get is [email protected] i am at [email protected] right now i have a 0310xpmw from excal.

 

[treepop]

[email protected]..so far

 

[Lithan]

JIUHB 0251 DUT3C. Does 2466 at 1.825v.

 

[Russell_hq]

dlt3c 0308 @2840MHz with 2.2v and stable
core temp 12ºC idle, 20ºC full load

 

[The_Jizzler]

dut3c juicb @2030 w/1.8vcore, 36c idle/39-41c load

 

[smesx1]

juicb dlt2c 0307vpmw 200*12 @ 2405mhz 1.725v

 

[shimmishim]

0310UPMW 11.5 x 208.85 = 2413 @ 1.8v

 

[quegyboe]

Athlon XP 1700+ JIUHB 0302 1.6v @ 11x182 2002mhz 1.75v's cooled by a Volcano 7 @ 45°C max load

 

[ChillPhatCat]

12.5x177= 2212 MHz 1.75V

1700+ JIUHB DLT3C 0310UMPW

Idle/load 37/43 SLK800A Heatsink, w/ 50 CFM 80mm fan.

27 Hours P95

 

[tediber]

DLT3C JIUHB0308XPMW
2.3ghz at 1.62volts (standard heatsink)

 

[R4z0r4mu5 Pr|m3]

JIUHB

10.5 x 200, [email protected]

haven't tried higher with more voltage

i only use 10 x 200, real clock = 2004mhz regularly at 1.675v

 

[martik]

[email protected]..so far

I have the same MB and cpu codes as you but get Prime95 errors after 5mins at 12.5x180 1.6v Temp=60C. Memory is at 7-3-3-3 What temp are you running?

 

[tediber]

i've upped the vcore to 1.7volts at 2.3ghz is now prime95 stable EPOX 8K3A .... the vcore dips down to 1.68v sometimes as low as 1.64volts

 

[lazyart]

11.5x192 on air @ 1.7
2208 (real clock 2219).

Going to water soon...

 

[Alexandrus]

1700DLT3C 0310WPMW at 2250MHz with 1.6V so far, haven't tried higher clocks or higher voltages.

 

[Supertrucker]

its in a box of parts just now but JIUCB 0251 @1.92vcore 2060mhz

 

[Wega!]

so is this ONLY for xp1700+'s? Or can i enter with my XP1800+?

 

[Damian]

DUT3C JIUCB @ 2001 (170x11.5), 1.85v

Mobo's sensors are very unreliable, so I can't tell what temps I' m getting