How Fast is Your 1700+ Tbred-B?

[sanford1]

2.24gHz @ 1.55V 136 * 16.5

I'm working my way down in voltage. So far, each .25V drop is worth about 1 degree C

This is a nice chip!

 

[MarMacMan]

AXDA1700DLT3C
9571376251650
JIUHB0308SPMW

Abit NF7-S v1.2
Kingston HyperX PC3000 256MB single stick
Core voltage 1.8
Chipset voltage 1.7
DIMM voltage 2.8
Temps 45C idle/53 full-load
Using Volcano 11 with SmartFan II @ full-speed

 

[Damian]

Got an 0312TPXW.

I can do 2040 easily at 1.725v, and the max I can do at 1.85v is 2240. Maybe once I get WC, I'll try to bump up the vcore to see if there are any improvements. It gets pretty hot, though, at 2240 and 1.85v, so I don't want to do any more vmodding.

 

[tediber]

damian is that a DUT3C ..... seems a bit high the vcore for 2.224ghz

 

[kfunk]

yea it does

 

[Damian]

No, it's a DLT3C. It's an 0312TPXW, so it really doesn't OC very well. I think it's one of the worst steppings, if not the worst for a JIUHB DLT3C.

And yes, I've tried lower vcores to no avail. I'm hoping that it will do well at 1.9v, but I have to do some extra vmodding first.

 

[tediber]

got 2 DLT3C JIUHB0308XPMW's both do just a wee bit over 2.1ghz at default vcore ...... highest i've gone so far atble is 2.37ghz with 1.7volts prime95 more than an hour no errors but all of a sudden my generic 300w PSU completely shutdown ...... and wouldn't power up until after several minutes of rest hehehehe ...... am gonna get me a 475w HEC PSU next week and maybe i'll get better results ....... i suspect that could it be possibly that my chip could go 2.2ghz at default vcore with a better PSU ..... as most XPMW's i've seen ..... amybe the PSU sucks that's why i needed to up vcore to get better results ....

 

[MrAngry]

Damn, doesn't anyone have a T-bred A with AIRGA stepping? I have just received an AIRGA 0250 from newegg and I don't know if I should send it back or try it out. I checked the CPU database and there are some decent speeds acheived with this stepping but not many entries for it either. Sorry I just realized this was a t-bred B thread

 

[Captain Hilts]

I'm at 2406MHz with my 1700+ JIUHB 0310WPMW, with 1.8v vcore. I have now been running prime for about 15 hours straight.

 

[{PMS}fishy]

Any one else?

Seems like the date on these is more important that anything else. I don't see proof that XPMW is any better than UPMW or the others.

 

[Niels W K]

I am at 1666 right now....I still need to get a better CPU cooler, at 1.6 volts and very stable, unlocked by my MSI 6570 NForce2 mobo.
So the multiplier was set at 12.5.
But once I get a more hefty cooler and some more Arctic silverpaste...well and some other mods I will post the result, but sofar on normal cooling.
It is a TB 0.13.

 

[Rottys-R-Us]

I could probably get more if I had a mobo with 1/6 divider.

 

[tediber]

all you need is probably up your vdimm or replace the stock NB heatsink with something slightly better and use AS3 ...... mine runs perfectly stable to 210FSB

 

[Damian]

If you have a 1/5 divider and go to 210, that's like a 42 MHz PCI bus... no HD can take that, can it? How were you able to get 210?

I tried a 200 FSB (just out of stupidity/curiosity) on my MSI and the HD corrupted after one boot.

 

[Rottys-R-Us]

If you have a 1/5 divider and go to 210, that's like a 42 MHz PCI bus... no HD can take that, can it? How were you able to get 210?

I tried a 200 FSB (just out of stupidity/curiosity) on my MSI and the HD corrupted after one boot.

I know,hmmm, my pci mhz is @ 38 now.

all you need is probably up your vdimm or replace the stock NB heatsink with something slightly better and use AS3 ...... mine runs perfectly stable to 210FSB

I had it off, lapped it and put ASIII on, and have a fan on also, and have had the vc up, and mem running Turbo, even relaxed it dont matter.

 

[Niels W K]

Well I just lowered the multiplier to 8.5 and got the bus up to 200/400.
Now it runs at 1703Mhz.
Still with stock cooling and voltage.
So the last 300mhz should be possible with more efficient cooling and Arcticsilver

 

[Rottys-R-Us]

Well, maybe now that it is burnt in it will stay, so far so good, ran "Toast" fine.

 

[Jon]

JIUHB 0302 I don't remember the rest for it :\

2415MHz

2.2V on an EPoX 8RDA.

I run this at an even 2.3GHz most of the time however as it's getting hot out and hotter in here. I can run the VCore at 1.95V at 2.3GHz as well, so it's a little more piece of mind.

I have another 1700B in that I've yet to install. Don't even know the stepping on it, but it came from Newegg earlier this week. It'll be air cooled, so I doubt I'll get the same results but I'll throw it in the mix when I find out :]

 

[james.miller]

the results are pretty incredible. 41.67% are doing 2.3ghz+. thats just amazing.

 

[RangerJoe]

im up to 2.36 now, with 1.725vcore. not too bad id say!