A64 Overclocking Result Collection

[Seanohue]

Model number: OSA165DAA6CD
Core description: Opteron 165, S939, .09 micron
5-letter code: CCBWE
Week-code: 0547
4-letter code: TPMW
CPU frequency:312x9
CPU voltage: 1.475 V
Cooling: Watercooled- Black Ice Extreme 2, D5 pump, MCW6002A
Temperatures: Idle- 23-24C Load- 32-33C
Motherboard: DFI Lanparty NF4 Ultra-D
Memory: Crucial Ballistix 2x1gb PC 4000
Memory bus frequency: 255mhz
Memory timing: 3-4-4-10 1T <- (CAS-tRP-tRCD-tRAS, 1T/2T)
Memory voltage: 2.8v
HT frequency: 3 x 312 (LDT 3)

http://valid.x86-secret.com/show_oc?id=62814

 

[before]

model number: ADA3800DAA5BV
core description: X2 Manchester
5-letter code: CCBWE
week-code: 0545
4-letter code: RPMW
CPU frequency: Stable @2450 MHz (245 x 10) | Sreen @2906 (291 x 10 | 1.55V)
CPU voltage: 1.31 V
temperature (system idle/load, CPU idle/load): PMWIC 29/36 C, CPU 26/36 C
cooling: Watercooling homemade
motherboard: DFI nF4 Ultra-D (623-2)
memory: pqi TCCD 507 (512 MB x 1)
memory bus frequency: 245 MHz
memory timing: 2.5-3-3-7 1T
memory voltage: 2.7 V
HT frequency: HTT x 3
power supply: Antec True Power 550W 2.0


I've pretested this CPU today before reselling, and managed to run two SP2004 @2450MHz with stock volts; it really impressed me

and just a shot to make a validation @2.9GHz... I guess it's possible to validate above, but I had not enough time to do so. Too bad that my liquid chiller is out of service... I would have loved to make this CPU benching above 3.0GHz

http://valid.x86-secret.com/show_oc.php?id=63512

 

[fordsierra4x4]

Model Number: ADA3000DIK4BI
Week-Code: 0451
5-letter code: CBBID
CPU frequency: Stable @ 2295 MHz (255 x 9)
CPU voltage: 1.45v
Temperature: 28*C Idle/36*C Load
Cooling: ThermalTake Silent Boost K8
Motherboard: MSI K8N Neo2 Platinum
Memory: 2 x 512mb Corsair TwinX 3200 C2
Memory bus frequency: 204MHz
Memory timings: 2.5-3-3-8 1T
Memory voltage: 2.7v
HT Frequency: HTT x 4
Power supply: 400 Watt Unknown (But Hefty)

I'll update this when my 9NPA+ Ultra has been installed - but dont expect the results to change a lot!!

 

[runsalone]

model number: Opteron 170
core description: CD(?) (link to shot of proc below)
5-letter code: CCBWE
week-code: 0546
4-letter code: XPMW
13-letter code: 1375786L50612
CPU frequency: highest stable tested so far: 2600 MHz (260 x 10)
CPU voltage: 1.45 V
temperature: system 30/35 C, CPU 30/41 C
cooling: XP-90C, vantec 92mm tornado at 12v
motherboard: DFI nF4 SLI-DR
memory: 512 mb Corsair PC3500, 512 mb Kingston PC3500
memory bus frequency: 185 MHz
memory timing: 2-4-4-8 1T
memory voltage: 2.6 V
HT frequency: HTT x 3
power supply: Enermax EG651P-VE

CPUz +prime95 screen

CPUz validation

Shot of the Opty

 

[before]

model number: ADA3800DAA5BV
core description: X2 Manchester
5-letter code: CCBWE
week-code: 0545
4-letter code: RPMW
CPU frequency: Stable @2706 MHz (271 x 10)
CPU voltage: 1.55 V
temperature (system idle/load, CPU idle/load): PMWIC 34/48 C, CPU 31/50 C
cooling: Watercooling homemade
motherboard: DFI nF4 Ultra-D (623-2)
memory: Kingston+Corsair BH5 (256 MB x 2)
memory bus frequency: 226 MHz
memory timing: 1.5-2-2-5 1T
memory voltage: 3.7 V
HT frequency: HTT x 3
power supply: Antec True Power 550W 2.0

@2706MHz 1h of 2*SP2004 --> Both cores individually selected.

@2701MHz 1h of 2*SP2004 --> Both cores unselected.

 

[Klimpen]

model number: OSA165DAA6CD
core description: JH9-E6
5-letter code: CCBWE
week-code: 0551
4-letter code: WPMW
13-letter code: 1392956L50282
CPU frequency: highest stable 2700 MHz (300 x 9)
CPU voltage: 1.4 V
temperature (system idle/load, CPU idle/load): CPU 24/34 C
cooling: Asetek Waterchill KT12A Dual (all coolingparts in external box for best cooling)
motherboard: SFI RDX200 CF-DR BIOS rdxdc23.bin
memory: Crucial Ballistix Z505 PC4000
memory bus frequency: 270 MHz
memory timing: 3-3-3-8 1T
memory voltage: 2.84 V
HT frequency: HTT x 3
power supply: Antec NeoPower 480W

(This all made me own a FX-60)

 

[fordsierra4x4]

An update on the new motherboard & Opteron 146

Model Number: OSA146DAA5BN
Core Description: SH-E4
Week-Code: 0546
5-letter code: CACJE
4-letter code: BPMW
13-letter code: 1362067K50375
CPU frequency: Stable @ 2600 MHz (260 x 10)
CPU voltage: 1.45v
Temperature: 29*C Idle/38*C Load
Cooling: ThermalTake Silent Boost K8
Motherboard: EpoX 9NPA+ Ultra
Memory: 2 x 512mb Corsair TwinX 3200 C2
Memory bus frequency: 216MHz
Memory timings: 2.5-3-3-8 1T
Memory voltage: 2.7v
HT Frequency: HTT x 4
Power supply: 400 Watt Unknown (But Hefty)​

It'll go to 2700Mhz and pass SuperPi, memtest, 3dmark, play games etc - but the Divx encoding doesnt like it and freezes everything

 

[jonspd]

model number: OSA146DAA5BN
core description: E4
5-letter code: CAB2E
week-code: 0546
4-letter code: FPAW
13-letter code: N/A
CPU frequency: 282x10=24/7 313x9=For benchs
CPU voltage: 1.52 V
temperature system 26/30C, CPU 32/40 C
cooling: xp-90c, 80 mm Tornado
motherboard: Asrock sataII bios 04XX
memory: 2x512mb 440's gskill LE
memory bus frequency: 256
memory timing: 2.5-4-3-8 1T
memory voltage: 2.84 V
HT frequency: 800 or 4x
power supply: FSP 530

 

[reddragonofeart]

Here is my(first ever) OC..
It took me a long time just to get to 1.8G let alone 2.2 but then I found this...
http://www.techenclave.com/forums/40487-post5.html
(I love this above guys way of explaining the OC process!)

model number: sda2600ai02bx or SDA2600AI02BX
core description: unsure... the chip is a Sempron 64bit 2600+ Socket754 desktop
5-letter code: LBBWE
week-code: unsure ?
4-letter code: unsure ?
13-letter code: unsure ?
CPU frequency: highest stable 2256 MHz (282 x8 ), (HTT 282 and CPU multiplier 8 )
CPU voltage: 1.55 V
temperature: (system idle/load, CPU idle/load): system 37/39C, CPU 29/39C
cooling: stock fan and sink.. but with Artic Silver not the stock goop
motherboard: DFI LANParty UT nF3 250Gb (Rev. E, bios ? )
memory: ocZ Premier PC3200 512 MB x 2 DDR400 CL2.5 3-3-7 /w heatspreaders
memory bus frequency: 241.0 MHz
memory timing: 2.5-3-3-7 2T (tCAS-tRCD-tRP-tRAS, 1T/2T)
memory voltage: 2.6V (stock setting)
HT frequency: HTT x 3 <- (Usually between 3x - 5x)
power supply: ATX-2035FA 350W (came stock with case)




My ScreenCap is here...
http://24.137.67.235:1976/will/TheO...tested-282maxfsb--SuperPI-speedtest49secs.PNG



I seem to have Rev.E so I get SSE3 (look at 2600+)
http://www.amd.com/us-en/Processors/ProductInformation/0,,30_118_11599_11604,00.html



Open to advice or comments.. I love input..
email me if you like.. reddragonofearth at that kewl spot... gmail




..

 

[Burnboy]

A64 3700+ San Diego results

model number: ADA3700DAA5BN
core description: San Diego, 90nm, rev. SH-E4, Family: F, Model: 7
5-letter code: ???
week-code: ???
4-letter code: ???
13-letter code: ???
CPU frequency: highest stable 2863 MHz (260x11)
optional highest boot: 2930 MHz (266x11)
CPU voltage: 1.55 V
temperature (system idle/load, CPU idle/load): system 28/30 C, CPU 44/52 C
cooling: Zalman 120mm fan/copper heatsink combo
motherboard: Abit AN8-V Phoenix Award BIOS v6.0, nforce 4 chipset
memory: Corsair PC3200 dual-channel 512MB x 2
memory bus frequency: 204 MHz
memory timing: 2.5-3-3-7 1T
memory voltage: 2.5 V
HT frequency: not sure (set to "auto" in BIOS)
power supply: Antec 450W

PLEASE NOTE: For some reason the latest version of CPU-Z is not correctly displaying the CPU voltage. The CPU is at 1.55v NOT 1.4v

If someone can tell me where to locate the 4,5, and 13 digit codes and week code I will post them.

 

[heads_up]

Just seeing some guy w/ the same cpu stepping/week as me, so his max oc was 2.7Ghz, well mines 2.8Ghz, im restricted by my hdd currently, but ill fix issues soon, so here ya go...

model number: ADA3000DAA4BW
core description: Venice 3000+ DH-E6
5-letter code: LBBWE
week-code: 0542
4-letter code: EPHW
13-letter codeno idea)
CPU frequency: 2808.4 MHz (312x9.0)
CPU voltage: 1.568 V
temperature: chipset 46 C, CPU 38 C (LOAD TEMPS)
cooling: Thermalright XP-90 + Some random 92mm LED fan
motherboard: DFI LanParty SLI-DR
memory: Geil Value
memory bus frequency: 234
memory timing: 2.5-3-3-8 1T
memory voltage: 2.7 V
HT frequency: HTT x 3.0
power supply: Thermaltake XP480 (400Watt)

And heres a picture of proof

Let me know what ya think

 

[jcw122]

Awesome thread, thanks, I was lookin for this.

 

[ochungry]

I have this Venice 3000 @ 2855mhz 1.61 vcore. Don't remember the stepping but will provide once I open the case to install a heatpipe system. Might even raise the vcore and try to bench at higher speed. I am also getting better mem kit w/ tighter timing to get better Spi score. But for now here it is
Screenshot

 

[before]

model number: ADAFX55DAA5BN
core description: FX-55 San Diego
5-letter code: CABCE
week-code: 0516
4-letter code: WPMW
CPU frequency: Stable @3355 MHz (258 x 13)
CPU voltage: 1.68 V
temperature (CPU idle/load): CPU -45/? C
cooling: Cascade R290/R170 ~-100°C unloaded
motherboard: DFI nF4 Ultra-D (623-2BTA)
memory: Kingston+Corsair BH5 (256 MB x 2)
memory bus frequency: 258 MHz
memory timing: 1.5-2-2-0 1T
memory voltage: 3.6 V
HT frequency: HTT x 2
power supply: Antec True Power 550W 2.0

UPDATED

 

[nicspits]

model number: OSA144DAA5BN
core description: E4
5-letter code: CABNE
week: 05?? darn blurry pencil marks
4-letter code: EPMW
cpu frequency highest stable = 2773 mhz 308x9
cpu vcore: 1.47v
System/CPU temperature: 27/30,41/55 (can we say not callibrated properly?)
cooling: Scythe Ninja, 120mm fan on it, a 90mm on it too, and 2 120s in an slk3000b(front and back). Increasing fan speed to "howling all over" affects temps 2-3C after a few minutes..... like I said, not calibrated properly.
mobo: K8N Neo2 Platinum
memory: 2x512mb Mushkin PC3500 2:3:3
memory bus: 198mhz
memory timings: 2.5-3-3-8 1T
vdimm: 2.85v
htt freq: HTT x 3
psu: Antec TruePower 530

I'm very happy with this system , considering it is just a day old and I've already got her up and over the average for 144s, I feel pretty good Primed it overnight but of course closed prime when I first woke up... sorry.

 

[nicspits]

update to the above. Inserted a thermal probe and bam, it's reading 7-8C over what the prode is giving as load temps. I knew it!!! hmmm, perhaps I can push it further, hmmm.

 

[apesoccer]

model number: ADA3500DKA4CG
core description: E4
5-letter code: CDBHE
week-code: 0532
4-letter code: XPMW
13-letter code: 1366276K50213
CPU frequency: 2805
CPU voltage: 1.55v
temperature: 39/52c
cooling: stock
motherboard: DFI LANPARTY UT nF4 SLI-DR Expert (12/7)
memory: 512x2 PDC1G3200-XBLK (TCCD)
memory bus frequency: 255
memory timing: en 2.5 3 7 3 9 12 2 2 1 2 3120 1 en auto 0 7 2 7ns Norm 6ns 256 dis 16x 7x dis
memory voltage: 2.87 V
HT frequency: HTT x 3
power supply: Sparkle FSP550-60PLG

My personal settings db for this board:
http://home.comcast.net/~apesoccer/oc/Expert_Dec05bios.htm

 

[TerraPhantm]

Model Number: ADA4400DAA6CD
Core Description: E6
5-Letter Code: CCBWE
Week Code: 0523
4-Letter Code: ???? (I think its RPMW, but I'm not positive)
CPU Frequency: 2799MHz
vCore: 1.58v
Temperatures: 33/43
Cooling: Water
Motherboard: DFI LanParty UT Ultra-D Rev. AB0
Memory: 2x512 G. Skill LA (TCCD 540)
Memory Frequency: 311MHz
Memory Timings: 2.5-4-3-7 1T
Memory Votlage: 2.91v
HT Frequency: HTT*3
Power Supply: OCZ PowerStream 520W

Fairly happy with the system, its completely prime stable at this speed.

 

[deamon32]

check the sig

 

[Dan0512]

Model Number: ADA3000DAA4BP
Core Description: DH-E3
5-Letter Code: LBBLE
Week Code: 0521
4-Letter Code: CPCW
13-Letter Code: Z711266F52422
CPU Frequency: 2655 Mhz (295x9)
V-Core: 1.55v
Temperatures: 32/46
Cooling: Air (Zalman CNPS7000B-Cu)
Motherboard: Asus A8N-E Rev. A3, BIOS 1011
Memory: 2x512Mb Kingston PC3200 CL3 ValueRAM
Memory Frequency: 241 Mhz
Memory Timings: 2.5-3-2-5 2T
Memory Voltage: 2.9v
HT Frequency: HTT*4
Power Supply: Generic 300W

Bought this chip around Septeber '05. Week 21 kind of old for September. Very happy though. Maximum ever achieved bootable SPi 1M pass frequency is 2750 Mhz. Load temperature is variable (season to season, that one is summer on 1 hour old AS5)

dan