- Joined
- Aug 15, 2003
- Location
- Southern California
Hello All,
I have a 2.66 Ghz Pentium 4, SOYO P4X400 Dragon Lite MOBO (which supports up to 3.06 ghz), Mushkin 512MB PC3200, Geforce 128MB FX5200 and 420 watts PSU. I would like to overclock my CPU to 3.0 GHZ. Thats my goal. I have successfully cranked up my CPU speed to 2.88 GHZ but if I set my frequency any higher, it would cause my system to reboot. I tried increasing my CPU voltage, Memory voltage and AGP voltage to no avail. One guy suggested adjusting my DRAM timings to 2-2-2-6 but I could not figure out how to adjust the timings from my SOYO dragon lite MOBO because It is different.
These are my DRAM Timings
SDRAM CAS LATENCY -----------------2.5
BANK INTERLEAVE------------------------DISABLED
PRECHARGE TO ACTIVE (TRP)---------- 4T
ACTIVE TO PRECHARGE (TRAS)-------- 10T
ACTIVE TO CMD (TRCD)----------------- 4T
DRAM COMMAND RATE ----------------- 2T
DRAM BURST LEN------------------------- 8
Write recovery time----------------------4T
DRAM Access Time------------------------3T
Can anyone please help out a newbie.. any help would be greatly appreciated..
edit: typos /replace "not sure" with the right numbers
I have a 2.66 Ghz Pentium 4, SOYO P4X400 Dragon Lite MOBO (which supports up to 3.06 ghz), Mushkin 512MB PC3200, Geforce 128MB FX5200 and 420 watts PSU. I would like to overclock my CPU to 3.0 GHZ. Thats my goal. I have successfully cranked up my CPU speed to 2.88 GHZ but if I set my frequency any higher, it would cause my system to reboot. I tried increasing my CPU voltage, Memory voltage and AGP voltage to no avail. One guy suggested adjusting my DRAM timings to 2-2-2-6 but I could not figure out how to adjust the timings from my SOYO dragon lite MOBO because It is different.
These are my DRAM Timings
SDRAM CAS LATENCY -----------------2.5
BANK INTERLEAVE------------------------DISABLED
PRECHARGE TO ACTIVE (TRP)---------- 4T
ACTIVE TO PRECHARGE (TRAS)-------- 10T
ACTIVE TO CMD (TRCD)----------------- 4T
DRAM COMMAND RATE ----------------- 2T
DRAM BURST LEN------------------------- 8
Write recovery time----------------------4T
DRAM Access Time------------------------3T
Can anyone please help out a newbie.. any help would be greatly appreciated..
edit: typos /replace "not sure" with the right numbers
Last edited: