is this waterblock ok

[peewee]

it has solder coming out the sides

 

[peewee]

2

 

[mrpcman]

the pic kinda sucks, but the block looks normal to me.

 

[bdf24]

Should be fine as long as it doesnt leak at the seams.

 

[surlyjoe]

if it dont leak ,its OK

 

[Yomama]

Should be ok - unless it leaks...#)

Yo

 

[Megahurtz]

A shot of the 'innards' would have been nice..

T

 

[1g_raider]

I would bench test it if you are worried about leaks. Hook it up and run it with the pump you intend to use. Let it run for a day or so. If it dosen't leak install it and put that puppy to work !

 

[0dan0]

If possible, you might want to change those 90degree elbow hose barbs to 45 degree elbow hose barbs or straight hose barbs, because 90degree elbows kill your flowrate and add back-pressure.

-Dan

 

[peewee]

0dan0 (May 22, 2001 12:01 a.m.):
If possible, you might want to change those 90degree elbow hose barbs to 45 degree elbow hose barbs or straight hose barbs, because 90degree elbows kill your flowrate and add back-pressure.

-Dan

well i hooked it up for like 4 hrs today at work and after about 3 hrs the hose's started leaking at the waterblock, is it because of the 90degree barbs?? do they just unscrew??