KT7A or MSI KT7 Turbo and 124Mhz bus

[Jerry]

When do you get to set PCI divider 1/4 and AGP 1/2 when you start overclocking past 100Mhz? If I need to run say 124Mhz will I get 31MHz PCI and AGP of 62Mhz? If you have a KT133A board let me know when these dividers become available.



Thanks
Jerry

 

[Starfire_MK2]

Can't really help you too much...have you tried using Fuzzy Logic 3? It will show you whay Mhz the AGP and PCI buses run at. Just go "Auto clock", and watch. It may not get to 124, but it should reach 111 FSB. This will at least give you an idea of what you need.

 

[Hoot]

With my KT7A, at 124 Mhz FSB, the PCI is running 31, so that is probably the 1/4 devisor threshold point.

Hoot