I just bought a iwill KK266, and a new 1.2 Thunderbird, L cache's are
tied together but when I set the mother board up it will run at
133mhz, but no matter what mutliplier I use the cpu run the same
speed, if i rasie the Bus higher the CPU goes higher.
It appears to be locked at 8.5 somehow,
133 FSB = 1130mhz
150 FSB = 1275mhz
155 FSB = 1318mhz
No matter what multiplier I use, I get the above results.
The board will only post 1200mhz if I have the multiplier in cmos set to "auto" and 100mhz FSB. If I set the multiplier "manually" at 12 x 100 I get 850mhz!!!!!!!!
Motherboard is a KK266 ver 1.2
Please help, I would like to 9 @ 155
Thanks in advance
tied together but when I set the mother board up it will run at
133mhz, but no matter what mutliplier I use the cpu run the same
speed, if i rasie the Bus higher the CPU goes higher.
It appears to be locked at 8.5 somehow,
133 FSB = 1130mhz
150 FSB = 1275mhz
155 FSB = 1318mhz
No matter what multiplier I use, I get the above results.
The board will only post 1200mhz if I have the multiplier in cmos set to "auto" and 100mhz FSB. If I set the multiplier "manually" at 12 x 100 I get 850mhz!!!!!!!!
Motherboard is a KK266 ver 1.2
Please help, I would like to 9 @ 155
Thanks in advance