My new 1700+ 0308 SMPW

[Larethus]

My new 1700+ 0308 SPMW

Edit: I think I made a grand typo. I think it is SPMW not SMPW, as I don't think there IS a SMPW. I just must have copied it down wrong before I put the chip in.

After all the talk of the DLT3C 1700+ chips, I figured I would try one myself. I only found once place in the city that had them, and I was lucky that they had the exact one I was looking for. I have tried two 0302 DUT3C chips that overclocked decent, but weren’t exactly what I was looking for so I handed them down to friends. This is a 1700+ JIUHB 0308 SPMW. Below are some of the speeds I tried that were all stable with PRIME 95:

10x200 (2ghz) 1.56v
10.5x200 (2.1ghz) 1.56v
11x200 (2.2ghz) 1.6v
11.5x200 (2.3ghz) 1.65v
12x200 (2.4ghz) 1.775v
12.5x200 (2.5ghz) 1.9v
12x209 (2.51ghz) 1.92v


This is what it sits at right now with 1.92v stable in PRIME95 and 3DMark. Also played UT2003 all night with it at these settings:

To say the least, I am quite impressed. These are great chips. I'm positive this chip has more room left in it too, with a little more voltage. I may shoot for higher later, but as you guys can see from my signature, it is quite an improvment from what I had my 2400 at.

 

[tediber]

very nice i got one of these DLT3C JIUHB0308 xpmw ..... ready to be watercooled hehehe ..... may i ask what cooling you are using ?? must be cold in canada ...... it's hot as hell here in my country

 

[Larethus]

Yes it is cold here in Canada. Snow is still on the ground.
I am using air cooling. Well you can expect good results from that chip
The cooling I am using is a Thermalright SLK-800 with a Vantec Tornado. I think it also helps that my case is quite well ventilated. The blowholes I added on the top of the case really made a nice difference. Please let us all know what kind of results you get with your chip!