PhantomDot1
New Member
- Joined
- Mar 27, 2013
I'm trying to overclock my cpu, Llano A6-3650 QuadCore, to about 3.3/3.4 ghz.
Now it kind of bottlenecks my pc, so it isnt using the graphics card fully. since I cant change the multiplier I have been able to up the base clock speed to 121 mhz, and that times the multiplier gives me 3.1 ghz, which is about 10% overclock, but I want to push it a little bit further to as said 3.3/3.4 on basic heatsink/fans. When I up it to 123 mhz base clock speed, which would lead to 3.15 ghz in total, then I get bluescreens, Ive tried upping the voltage with almost 0.08V, with still bluescreens as result.
My motherboard is an asus FM1 F1A55-M usb3.0. I dont know whether there is somekind of setting which is holding me back here.
I have tried fiddling with the lead line settings, without result.
here are some of my specs:
550W psu
Llano A6-3650 Quad Core 2.6 ghz
asus FM! F1A55-M USB3.0
6GB DDR4 Kingston Ram
AMD Radeon HD 7850 1GB
Hope to be able to figure it out, cuz this is my first overclock, and I hope it will help me a lot with future overclocks.
P.S. I overclock in the bios, the programs in windows suck I have heard
EDIT:
also on 121 mhz base clock speed I get bluescreens, I think this means it is not stable, but more information/tips on this is/are welcome !
Now it kind of bottlenecks my pc, so it isnt using the graphics card fully. since I cant change the multiplier I have been able to up the base clock speed to 121 mhz, and that times the multiplier gives me 3.1 ghz, which is about 10% overclock, but I want to push it a little bit further to as said 3.3/3.4 on basic heatsink/fans. When I up it to 123 mhz base clock speed, which would lead to 3.15 ghz in total, then I get bluescreens, Ive tried upping the voltage with almost 0.08V, with still bluescreens as result.
My motherboard is an asus FM1 F1A55-M usb3.0. I dont know whether there is somekind of setting which is holding me back here.
I have tried fiddling with the lead line settings, without result.
here are some of my specs:
550W psu
Llano A6-3650 Quad Core 2.6 ghz
asus FM! F1A55-M USB3.0
6GB DDR4 Kingston Ram
AMD Radeon HD 7850 1GB
Hope to be able to figure it out, cuz this is my first overclock, and I hope it will help me a lot with future overclocks.
P.S. I overclock in the bios, the programs in windows suck I have heard
EDIT:
also on 121 mhz base clock speed I get bluescreens, I think this means it is not stable, but more information/tips on this is/are welcome !
Last edited: