Thanks guys. Really appreciate all the help and advice.
This morning I decided to give it another go. I bumped up the CPU Voltage 1 notch from 1.425V to 1.425525V.
Within 1 minute of starting Prime95, 5 Workers stopped because of errors. I stopped all Workers and started again. Close to an hour later 2 Workers had stopped. Something's really wrong with my OC!!!! Here’s the Prime95 results.txt.
[Sat Dec 10 07:27:00 2011]
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
[Sat Dec 10 07:43:29 2011]
Self-test 1024K passed!
Self-test 1024K passed!
Self-test 1024K passed!
Self-test 1024K passed!
Self-test 1024K passed!
Self-test 1024K passed!
[Sat Dec 10 07:58:37 2011]
Self-test 8K passed!
Self-test 8K passed!
Self-test 8K passed!
Self-test 8K passed!
Self-test 8K passed!
Self-test 8K passed!
[Sat Dec 10 08:14:45 2011]
Self-test 10K passed!
Self-test 10K passed!
Self-test 10K passed!
Self-test 10K passed!
Self-test 10K passed!
Self-test 10K passed!
[Sat Dec 10 08:30:07 2011]
Self-test 896K passed!
Self-test 896K passed!
Self-test 896K passed!
Self-test 896K passed!
Self-test 896K passed!
Self-test 896K passed!
[Sat Dec 10 08:42:32 2011]
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
Self-test 768K passed!
Self-test 768K passed!
Self-test 768K passed!
Self-test 768K passed!
My present OC settings in BIOS are as follows.
Current CPU Frequency (Read Only) 225 x 16.5 MHz
Current DRAM Frequency 1499 M
Hz
Adjust CPU FSB Frequency 225
Adjust CPU Ratio [16.5]
Adjusted CPU Frequency 3712
Adjust CPU-NB Ratio [10]
Adjusted CPU-NB Frequency 2250 MHz
OC Genie Lite [Disabled]
CPU Core Control [Auto]
Unlock CPU Core [Disabled]
AMD Turbo Core Technology Auto
DRAM Frequency [DDR3-1333MHz]
Adjusted DRAM Frequency 1499 MHz
DRAM Timing Mode [Unlink]
> Advanced DRAM Configuration
HT Link Speed [10]
Adjusted HT Link Frequency 2250 MHz
> HT Link Control
Adjust PCI-E Frequency (MHz) 100
CPU Voltage [1.425525 V]
CPU-NB Voltage [1.205000 V]
DRAM Voltage [1.706 V]
NB Voltage [1.372 V]
Ram timings are set at 9-9-9-24-34-2T.
I apologise for being a baby here. But I'm really new to all this. I'd be more than satisfied if I can get it stable at 3.7GHz. What should I do now? Thank you.
EDIT
DRAM Voltage of 1.706 V appears high. I chose this figure because OC Genie usually sets this to 1.804 V.