Results 1 to 15 of 15
Thread: Finally joined the 4ghz club
05-01-10, 10:32 AM #1
Finally joined the 4ghz club
Finally joined the 4ghz club, voltage is 1.4v, at full load temps are 60c.
05-01-10, 10:33 AM #2
'Bout dam time! Very nicely done
ASRock Z97 Extreme 6 /i7 4790K De-Lid @ 4.7GHz
GSKILL Ripjaws X F3-2400C11D-16GXM 16GB (2x8GB)
H2O = XSPC RayStorm / Coolgate Quad CG480 Ultimate / Lowara D5 / XSPC Dual Bay Res V1
Liteon SCS-256L9S SSD 256GB / Toshiba Red 2TB / WD VelociRaptor 300GB
Zotac GTX 1070 AMP! Extreme @ 2100 / 4500
Seasonic Prime Titanium SSR-650TD 650w
Phanteks Enthoo Primo / Win10 Pro x64
** Under TITLE II, SECTION 210.340 it is legal to overclock **
05-01-10, 10:37 AM #3
Chears dood, is the chip gonna be ok with 1.4v?
05-01-10, 10:41 AM #4
- Join Date
- Mar 2010
nice bro. I recently joined with my vcore at 1.38. gotta love the i7's!
05-01-10, 10:42 AM #5
05-01-10, 10:44 AM #6
with a bit of tweaking you can probably lower the voltage, i managed 4GHz on my old Q9650 with 1.32v... but chips vary so you might not...
but that doesnt really matter... Good going!!i5 4670K @ 4.5GHz with Corsair H60
MSI Z87-G45 GAMING
8GB Corsair DDR3 1800MHz
MSI 980ti 6GB
850w Akasa Venom
1TB WD, 3TB WD Red and 750GB WD Cavier Green
Acer XG270HU 1440p @ 144Hz and Samsung SA700D 1080p @ 120Hz
"we should team up... dandy duff `n double bluff?" Bobbybubblehead
05-01-10, 10:51 AM #7
Everest stability test and Seti@home.
05-01-10, 11:08 AM #8
not that much Vcore really . last weekend (for benching I was giving my 45nm chip 1.8v on water )4670k @ 4.8ghz 1.45v
Asus 950gtx 2gig + 225 GPU + 400 Mem
Hyper X 16gig 1600mhz
Samsung 850 evo 500 gig
Cooling = Heatkiller copper (CPU block) / 3x120 / 2x120 / DD TDX (on my gfx card) / D5 Pump / Bits power water tank-z
" If that Bong is filled with the right stuff you wouldn't give a damn how much noise the cooling system made lol" ViperJohn
05-01-10, 11:39 AM #9
05-01-10, 11:43 AM #10
05-01-10, 12:03 PM #11
05-01-10, 12:06 PM #12
Totally though this was a different thread, my bad!
Keep going, lets see 4.4!
05-01-10, 06:07 PM #13
Congratulations. i never got my ES QX9650 over 3.8Ghz stable.Intel Core I7-3960X 6 Core CPU @ 4.5Ghz
Corsair H80 CPU cooler
Intel DX79SI motherboard
32GB Crucial DDR-III 1600Mhz
2x Seagate 240GB SATA SSD Drive RAID 0
2x EVGA GTX 1080 SLI
Enermax Galaxy Evo 1250w PSU
Thermaltake Armor Chassis
LG Blu-Ray + Sony DVD-RW
05-01-10, 08:27 PM #14
I've gotten 4.3 stable and 4.4 to boot on one of those chips. 4.3 was with like 1.375 vcore or something but 4.4 was like 1.4. never had my FSB that high though. I knocked up the multi cause I was using a p5k premium. nice job on the 4.0Ghz clubBeastmodeSager NP9285 | i7-980x @ 3.33Ghz| 12gb DDR3 1333Mhz | GTX 285m | 1920x1200 |PM800 256GB SSD | 500GB 7200rpm HDDHeatware
05-02-10, 01:53 AM #15
Thnx guys, just installed LinX, going to run some tests with that and then see what else i can get.